Data Sheet ADF5000
Rev. A | Page 3 of 12
SPECIFICATIONS
VDD1 = VDD2 = 3.3 V ± 10%, GND = 0 V; dBm referred to 50 Ω; T
A
= T
MIN
to T
MAX
, unless otherwise noted. The operating temperature
range is −40°C to +105°C.
Table 1.
Parameter Min Typ Max Unit Test Conditions/Comments
Input Frequency 4 18 GHz
RF Input Sensitivity −10 +10 dBm 4 GHz to 18 GHz
Output Power −10 −5 dBm Single-ended output connected into 50 Ω load
−7 −2 dBm
Differential outputs connected into 100 Ω
differential load
Output Voltage Swing 200 330 mV p-p
Peak-to-peak voltage swing on each single-ended
output, connected into 50 Ω load
400 660 mV p-p
Peak-to-peak voltage swing on differential
output, connected into 100 Ω differential load
1000 mV p-p
Peak-to-peak voltage swing on each single-ended
output, no load condition
Phase Noise −147 dBc/Hz Input frequency (f
IN
) = 12 GHz, offset = 100 kHz
Reverse Leakage −60 dBm RF input power (P
IN
) = 0 dBm, RF
OUT
= 4 GHz
Second Harmonic Content −28 dBc
Third Harmonic Content −12 dBc
Fourth Harmonic Content −37 dBc
Fifth Harmonic Content −19 dBc
CE INPUT
Input High Voltage, V
IH
2.2 V
Input Low Voltage, V
IL
0.3 V
POWER SUPPLIES
Voltage Supply 3.0 3.3 3.6 V
I
DD
(I
DD1
+ I
DD2
)
Active 30 60 mA CE is high
Power-Down 17 30 mA CE is low
