Spec. No. JENF243A-9148-01 P.2/8
MURATA MFG.CO., LTD.
Reference Only
6. Specifications
6-1. Electrical
No. Item Specification Test Method
6-1-1 Impedance Meet item 3.
Measuring Frequency : 100MHz±1MHz
Measuring Equipment : KEYSIGHT4291A or the equivalent
Test Fixture : KEYSIGHT16192A or the equivalent
6-1-2 DC Resistance Meet item 3.
Measuring Equipment : Digital multi meter
*Except resistance of the Substrate and Wire
6-2. Mechanical Performance (based on Table 13 for FILTER EMI SUPPRESSORS/ FILTERS)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No. Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room temperature, then
measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-55 deg C to +125 deg C
Set for 24hours at room temperature, then
measured.
Meet Table A after testing.
5 Destructive
Physical Analysis
Per EIA469
No electrical tests
No defects
7 Biased Humidity 1000hours at 85 deg C, 85%RH
Apply max rated current.
Meet Table A after testing.
8 Operational Life Apply 125 deg C 1000hours
Set for 24hours at room temperature, then
measured
Meet Table A after testing.
If the rated current of parts exceed 1A,
the operating temperature should be 85 deg C.
9 External Visual Visual inspection No abnormalities
10 Physical Dimension Meet ITEM 4
（Style and Dimensions）
No defects
12 Resistance to Solvents Per MIL-STD-202 Method 215 Not Applicable
13 Mechanical Shock
Per MIL-STD-202 Method 213
Condition F:
1500g’s(14.7N)/0.5ms/
Half sine
Meet Table B after testing.
Table B
Appearance No damage
Impedance
Change
(at 100MHz)
Within ±30%
DC
Resistance
Meet item 3.
14 Vibration 5g's(0.049N) for 20 minutes, 12cycles
each of
3 orientations
Test from 10-2000Hz.
Meet Table B after testing.
Appearance No damage
Impedance
Change
(at 100MHz)
Within ±50%
DC
Resistance
Meet item 3.
