ILSB-1206
www.vishay.com
Vishay Dale
Revision: 10-Jun-15
1
Document Number: 34029
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Monolithic Chip Inductors
MECHANICAL SPECIFICATIONS
Solderability: 90 % coverage after 5 s dip in 235 °C solder
following 60 s preheat at 120 °C to 150 °C and type R flux dip
Resistance to Solder Heat: 10 s in 260 °C solder, after
preheat and flux per above
Termination: 100 % Sn
Terminal Strength: 0.1 kg for 30 s
Beam Strength: 2.5 kg
FEATURES
• High reliability
• Surface mountable
• Magnetically self shielded
• Nickel barrier plating virtuallly eliminates silver
migration
• Material categorization: for definitions of
compliance please see
www.vishay.com/doc?99912
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: -55 °C to +125 °C
Thermal Shock: -40 °C to +85 °C
Humidity: 90 % RH at 40 °C, 1000 h at full rated current
Load Life: 85 °C for 1000 h at full rated current
STANDARD ELECTRICAL SPECIFICATIONS
INDUCTANCE
(μH)
TOL.
THICKNESS “D”
(INCHES [mm])
TEST FREQ.
(MHz)
Q
MIN.
SRF
MIN.
(MHz)
DCR
MAX.
()
RATED
DC CURRENT
(mA)
L AND Q
0.047 20 % 0.043 ± 0.012 [1.10 ± 0.3] 50 20 368 0.15 300
0.068 20 % 0.043 ± 0.012 [1.10 ± 0.3] 50 20 322 0.25 300
0.10 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 271 0.25 250
0.12 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 253 0.30 250
0.15 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 230 0.30 250
0.18 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 213 0.40 250
0.22 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 196 0.40 250
0.27 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 173 0.50 250
0.33 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 20 167 0.60 250
0.39 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 25 156 0.50 200
0.47 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 25 144 0.60 200
0.68 10 % 0.043 ± 0.012 [1.10 ± 0.3] 25 25 121 0.80 150
1.0 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 87 0.40 100
1.2 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 75 0.50 100
1.5 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 69 0.50 50
1.8 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 64 0.50 50
2.2 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 58 0.50 50
3.3 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 48 0.70 50
3.9 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 44 0.80 50
4.7 10 % 0.043 ± 0.012 [1.10 ± 0.3] 10 45 41 0.90 50
5.6 10 % 0.043 ± 0.012 [1.10 ± 0.3] 4 45 37 0.70 25
6.8 10 % 0.043 ± 0.012 [1.10 ± 0.3] 4 45 34 0.80 25
8.2 10 % 0.043 ± 0.012 [1.10 ± 0.3] 4 45 30 0.90 25
10 10 % 0.043 ± 0.012 [1.10 ± 0.3] 2 45 28 1.00 25
12 10 % 0.043 ± 0.012 [1.10 ± 0.3] 2 45 26 1.05 15
15 10 % 0.043 ± 0.012 [1.10 ± 0.3] 1 45 22 0.70 5
18 10 % 0.043 ± 0.012 [1.10 ± 0.3] 1 45 21 0.70 5
22 10 % 0.043 ± 0.012 [1.10 ± 0.3] 1 35 19 0.90 5
27 10 % 0.043 ± 0.012 [1.10 ± 0.3] 1 35 17 0.90 5
33 10 % 0.043 ± 0.012 [1.10 ± 0.3] 1 35 15 1.05 5
DESCRIPTION
ILSB-1206 3.3 μH ± 10 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC
®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
ILSB 1206 ER 3R3 K
PRODUCT FAMILY SIZE PACKAGE
CODE
INDUCTANCE
VALUE
TOL.