OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

8430AYI-61LFT

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21
REVISION D 10/15/15
8430I-61 DATA SHEET
19 500MHZ, CRYSTAL-TO-3.3V, 2.5V DIFFERENTIAL
LVPECL FREQUENCY SYNTHESIZER
TABLE 11. ORDERING INFORMATION
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Inc. (IDT) assumes no responsibility for either its use or for infringement
of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and indus-
trial applications. Any other applications such as those requiring high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT.
IDT reserves the right to change any circuitry or specifi cations without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
Part/Order Number Marking Package Shipping Packaging Temperature
8430AYI-61LF ICS8430AI61L 32 Lead “Lead-Free” LQFP tray -40°C to 85°C
8430AYI-61LFT ICS8430AI61L 32 Lead “Lead-Free” LQFP tape & reel -40°C to 85°C
NOTE: Parts that are ordered with an “LF” suffi x to the part number are the Pb-Free confi guration and are RoHS compliant.
500MHZ, CRYSTAL-TO-3.3V, 2.5V DIFFERENTIAL
LVPECL FREQUENCY SYNTHESIZER
8430I-61 DATA SHEET
20 REVISION D 10/15/15
REVISION HISTORY SHEET
Rev Table Page Description of Change Date
A
T7
1
6
Features Section - changed Supply Voltage bullet.
AC Table - Added 3V Note.
10/21/04
B
T4C
T5
T11
1
2
6
6
9
17
Features Section - added Lead-Free bullet.
Supply voltage bullet added supply modes.
Updated Parallel & Serial Load Operations Diagram.
LVPECL DC Characteristics Table added “NOTE: All DC parameters...”.
Crystal Characteristics Table - added Drive Level.
Recommendations for Unused Input and Output Pins.
Ordering Information Table - added Lead-Free part number and note.
7/12/05
B
T11
8
9
17
Updated Output Load AC Test Circuit diagram.
Updated Recommendations for Unused Input and Output Pins.
Ordering Information Table - added lead-free marking.
2/17/06
C
T1
T4A
T7A
T7B
1
3
5
7
7
10
13
Pin Assignment - swapped pins 24 & 25.
Pin Description table - pin 24 now XTAL_OUT and pin 25 now XTAL_IN.
Power Supply table - changed V
CCA
from 3.465V max. to V
CC
max., and
changed I
CCA
from 55mA max. to 15mA max. Added 2.5V output.
3.3V AC Characteristics table - added test condition to Period Jitter.
Added 3.3V/2.5V AC Characteristics table.
Corrected 3.3V Output Load AC Test Circuit Diagram.
Added 3.3V/2.5V Output Load AC Test Circuit Diagram.
Added LVCMOS to XTAL Interface section.
Updated Schematic Layout.
6/2/06
D T11 19
21
Updated datasheet’s header/footer with IDT from ICS.
Removed ICS prefi x from Part/Order Number column.
Added Contact Page.
7/27/10
D
T11 19 Ordering Information - removed leaded devices.
Updated data sheet format.
10/15/15
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, California 95138
Sales
800-345-7015 or +408-284-8200
Fax: 408-284-2775
www.IDT.com
Technical Support
email: clocks@idt.com
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifi cations described herein at any time and at IDT’s sole discretion. All information in
this document, including descriptions of product features and performance, is subject to change without notice. Performance specifi cations and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, wheth-
er express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others.
This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reason-
ably expected to signifi cantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or
their respective third party owners.
Copyright 2015. All rights reserved.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21

8430AYI-61LFT

Mfr. #:
Buy 8430AYI-61LFT
Manufacturer:
IDT
Description:
Clock Synthesizer / Jitter Cleaner Frequency Synthesizer
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet