Type 1 Mild Steel 3 Piece Wallmount Enclosure
N1W S
Series
Hinge Door with Quarter Turn
Application
Designed for indoor use to enclose controls, instruments, and components
which do not require oil-tight or dust-tight protection.
Ideal for applications where components may be easily mounted and wired
prior to installation of wrapper and door.
Standards
UL 50 Type 1
CSA Type 1
Complies with
NEMA Type 1
IEC 60529, IP20
Construction
Three piece assembly consisting of a base, wrapper, and door.
Components are attached and secured with metal screws.
14 gauge reverse formed base provides clearance for mounting hardware.
Wrapper is available in three depths: 4", 6", and 8".
Wrapper is formed from 16 gauge steel, with no knock-outs in the sides.
Door assembly formed from 16 gauge steel.
Removable door is mounted on slip hinges.
A bonding stud is provided on the door and a grounding screw is provided
for the enclosure.
Door is fastened with a slotted quarter turn latch.
Finish
Base, wrapper and door are finished in ANSI 61 gray powder coating.
Accessories
Quality Products. Service Excellence.