VDMR10A1, VDMO10A1, VDMY10A1, VDMG10A1
www.vishay.com
Vishay Semiconductors
Rev. 1.2, 29-Nov-13
2
Document Number: 84197
For technical questions, contact: LED@Vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1)
Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
(2)
Reverse voltage is only for IR test.It can not continue to operate at this situation.
(3)
Cross talk specification ≤ 2.5 %.
Notes
(1)
Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
(2)
Reverse voltage is only for IR test.It can not continue to operate at this situation.
(3)
Cross talk specification ≤ 2.5 %.
Notes
(1)
Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
(2)
Reverse voltage is only for IR test.It can not continue to operate at this situation.
(3)
Cross talk specification ≤ 2.5 %.
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VDMR10A1, SUPER RED
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 1 mA VDMR10A1 I
V
450 1600 - μcd
I
F
= 10 mA VDMR10A1 I
V
- 20 800 - μcd
Dominant wavelength I
F
= 20 mA
VDMR10A1
λ
d
- 631 - nm
Peak emmision wavelength I
F
= 20 mA λ
p
- 639 - nm
Spectral line half-width I
F
= 20 mA Δλ -20-
Forward voltage per segment I
F
= 20 mA V
F
-2.02.6V
Reverse current per segment
(2)
V
R
= 5 V I
R
- - 100 μA
Luminous intensity matching ratio I
F
= 10 mA I
v-m
--2:1
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VDMO10A1, SOFT ORANGE
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 1 mA VDMO10A1 I
V
180 650 - μcd
I
F
= 10 mA VDMO10A1 I
V
- 8250 - μcd
Dominant wavelength I
F
= 20 mA
VDMO10A1
λ
d
- 605 - nm
Peak emmision wavelength I
F
= 20 mA λ
p
- 611 - nm
Spectral line half-width I
F
= 20 mA Δλ -17-
Forward voltage per segment I
F
= 20 mA V
F
-2.02.6V
Reverse current per segment
(2)
V
R
= 5 V I
R
- - 100 μA
Luminous intensity matching ratio I
F
= 10 mA I
v-m
--2:1
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VDMY10A1, YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 1 mA VDMY10A1 I
V
450 1600 - μcd
I
F
= 10 mA VDMY10A1 I
V
- 17 600 - μcd
Dominant wavelength I
F
= 20 mA
VDMY10A1
λ
d
- 587 - nm
Peak emmision wavelength I
F
= 20 mA λ
p
- 588 - nm
Spectral line half-width I
F
= 20 mA Δλ -15-
Forward voltage per segment I
F
= 20 mA V
F
-2.02.6V
Reverse current per segment
(2)
V
R
= 5 V I
R
- - 100 μA
Luminous intensity matching ratio I
F
= 10 mA I
v-m
--2:1
