®
The OPA742 Series are designed for areas where lighng intensity and reliability are essenal. The light beam angle of 23°
is ideal for illuminang areas close or a long distances from the device while requiring minimal space. A High Performance
Heat Spreader (HPHS) is used to ensure the best heat dissipaon of any light assembly in the industry.
For custom colors and design contact your OPTEK representave.
1 wa LED on round substrate
Mono-color per strip (Blue, Green, Red, Yellow, White)
Component beam angle opon 23°
Universal connector (Tyco 2-292173-2 mates with 173977-2)
RoHS Compliant
OPA742_ (23° Beam Angle)
Electrical / Opcal Characteriscs: T
A
=25°C, I
F
=350mA
Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle Color Dominant Wavelength
OPA742Y23 2.5 22
23°
Yellow 587 nm
OPA742B23 3.6 8 Blue 470 nm
OPA742G23 3.6 41 Green 530 nm
OPA742R23 2.5 30 Red 625 nm
OPA742W23 3.6 41 White 6,500°K
RoHS
DO NOT LOOK DIRECTLY AT LED WITH
UNSHIELDED EYES OR DAMAGE TO
RETINA MAY OCCUR.
Ground
+ Voltage
OPA742_
See OVSP_BCR4 for
component specicaons
