CWSB21CACF

Series CWSB
Neon Miniature Power Rockers
www.nkk.com
B18
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
B
Rockers
Touch Tilt
Toggles
General Specifications
Electrical Capacity (Resistive Load)
Power Level: 9A @ 125V AC
Other Ratings
Contact Resistance: 20 milliohms maximum
Insulation Resistance: 500 megohms minimum @ 500V DC
Dielectric Strength: 1,500V AC minimum between contacts for 1 minute minimum;
3,000V AC minimum between contacts & case for 1 minute minimum
Mechanical Life: 30,000 operations minimum
Electrical Life: 10,000 operations minimum
Nominal Operating Force: 10.0N
Angle of Throw: 30°
Materials & Finishes
Rocker: Polycarbonate
Housing: Polyamide
Movable Contactor: Beryllium copper with silver plating
Movable Contacts: Silver alloy
Stationary Contacts: Silver alloy
Switch Terminals: Brass with silver plating
Lamp Terminals: Brass with silver plating
Environmental Data
Operating Temp Range: –20°C through +85°C (–4°F through +185°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 0.75mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Soldering Time & Temp: Manual Soldering: See Profile B in Supplement section.
Standards & Certifications
UL: File No. E44145
9A @ 125V AC
Markings on case are standard.
CSA: File No. 0701166_0_000
9A @ 125V AC
Markings on case are standard.
Series CWSB
Neon Miniature Power Rockers
www.nkk.com
B19
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable
Toggles
B
Rockers
Touch
Tilt
Distinctive Characteristics
Full face, Neon illumination in choice of red, amber, or green.
Neon lamp suited to 125V AC applications.
9-amp electrical capacity in compact body.
Built-in resistor for direct connection to
125V AC power source.
Low cost molded rocker.
Front panel, snap-in mounting assures
labor-saving installation.
Single-break, snap-acting contact mechanism
gives smooth actuation and audible feedback.
Quick-make, quick-break characteristic limits arcing
and prolongs electrical life.
Stable stationary contact construction for high reliability.
Offset terminal alignment gives outstanding insulation resistance and
dielectric strength.
Solder lug/.187” quick connect terminals can be used with connectors.
Actual Size
Series CWSB
Neon Miniature Power Rockers
www.nkk.com
B20
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
B
Rockers
Touch Tilt
Toggles
TYPICAL SWITCH ORDERING EXAMPLE
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
CWSB21CACF
Red Neon Lamp
DPST
ON-NONE-OFF Circuit
Red Rocker Cap
Black Housing
Solder Lug/
Quick Connect Terminals
POLE & CIRCUIT
Rocker Position Connected Terminals Throw & Switch/Lamp Schematic
Pole Model
Down Center Up Down Center Up
Note: Terminal numbers “1a” & “2a” are
actually on the switch.
DP CWSB21
ON
NONE OFF 1-1a 2-2a OPEN OPEN
DPST
CWSB
Circuit
1 ON NONE OFF
Poles
2 DPST
Housing
A Black
Cap Colors
C Red
D Amber
F Green
Neon Lamp
Colors
C Red
D Amber
F Green
Terminals
F
Solder Lug/
.187” (4.75mm)
Quick Connect*
C12 A FC
1
1a
22
a
IMPORTANT:
Switches are supplied with UL &
CSA markings on case. Specific
models & ratings noted on
General Specifications page.
* Wire harness & cable assemblies
offered only in Americas

CWSB21CACF

Mfr. #:
Manufacturer:
NKK Switches
Description:
Illuminated Switches Illuminated Rocker Switches DPST ON-NONE-OFF RED
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet