12220 World Trade Drive, San Diego, CA 92128 USA
Direct: 858 674 8100, Fax: 858-385-8003
www.pulseeng.com
Specifications subject to change without notice. Excelsus is a registered trade mark of Pulse Engineering, Inc.
© 2010 Pulse Engineering, Inc. EX132.B (11/10)
Z-BLOCKER® Z-330P2J2
xDSL over POTS CPE In-Line Filter
DC Resistance
Network port at 20mA <25 Ω
Tip and Ring to Ground at ≤ 100 Vdc
>10 MΩ
Tip and Ring to Ground at ≥ 100 Vdc and ≤ 200 Vdc
>30 kΩ
Operating Current 5 to 90 mA
Operating Voltages
Network tip to ring 0 to –80 Vdc
Network tip to ring level with ringing signal of 17 to 23Hz and 40 to 106 Vrms -20 to –80 Vdc
On-hook Voice Band Insertion Loss
Single lter -0.5dB to 1.5dB
With 5 lters -1.0dB to 6.5dB
On-hook Voice Band Insertion Loss Distortion
Single lter, 200 to 1000 Hz -1.5dB to 1.5dB
With 5 lters, 200 to 1000 Hz -5.5dB to 2.0dB
Single lter, 1 to 2.8 kHz -1.5dB to 1.5dB
With 5 lters, 1 to 2.8 kHz -2.0dB to 2.0dB
On- or Off-hook Envelope Delay 300 Hz - 2800 Hz
<250µs
Off-hook Voice Band Insertion Loss
Single lter -0.5dB to 0.5dB
With 5 lters -1.0dB to 1.0dB
Off-hook Voice Band Insertion Loss Distortion
Single lter, 200 to 3400 Hz -1.0dB to 0.5dB
With 5 lters, 200 to 3400 Hz -1.5dB to 2.5dB
Single lter, 3.4 to 4 kHz -1.5dB to 1.0dB
With 5 lters, 3.4 to 4 kHz -2.0dB to 3.25dB
Off-hook impedance distortion
Phone Port SRL Low >13 dB
“ ERL >9 dB
“ SRL High >3 dB
Network Port SRL Low >12 dB
“ ERL >10 dB
“ SRL High >5 dB
Inter-Modulation Distortion Second and Third order products >60 dB
On-hook High Band Stopband Attenuation
From 25 kHz to 12 MHz, between 20 and 90 mA >12 dB
Off-hook High Band Stopband Attenuation
From 25 to 50 kHz, between 20 and 90 mA >21 dB
From 25 to 50 kHz, between 7 and 20 mA >13 dB
From 50 k to 12 M Hz, between 20 and 90 mA >25 dB
From 50 k to 12 M Hz, between 7 and 20 mA >22 dB
Bridging Loss
Single lter, 25 kHz to 1.2 MHz <0.5 dB
With 5 lters, 25 kHz to 1.2 MHz <1.25 dB
Single lter, 25 kHz to 12 MHz <3.0 dB
With 5 lters, 25 kHz to 12 MHz <4.0 dB
Connectors: RJ-11 Jacks and RJ11 Plug; ≥ 50 micro-inches of gold plating over ≥100 micro-inches of nickel plating
Dimensions: Length = 2.04in (51.9mm), Width = 1.21in (30.8mm), Height = 0.710in (18.0mm)
Compliant and listed with UL / CSA 60950, FCC CFR 47 Part 68
Z-BLOCKER Z-330P2J2 Filter Specifications