SPEC NO: DSAF0040 REV NO: V.8 DATE: FEB/24/2009 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101013155-01
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
iewing
Angle [1]
Min. Typ. 2θ1/2
WP7113PBC/A Blue (InGaN) WATER CLEAR 480 1600
16
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 468 nm I
F=20mA
λD [1] Dominant Wavelength Blue 470 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Blue 21 nm I
F=20mA
C Capacitance Blue 100 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Blue 3.2 4 V IF=20mA
I
R Reverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds