• Ferrite shielded, low EMI
• Ferrite core material
• 500Vdc isolation between windings
• RoHS compliant
Applications
• As a transformer: SEPIC, flyback
• As an inductor: Buck, boost, coupled inductor
• Digital cameras, CD players, cellular phones, and PDA’s
• PCMCIA cards
• GPS systems
Environmental Data
• Storage temperature: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(Range is application specific).
• Solder reflow temperature: 260°C max. for 10 seconds max.
Packaging
• Supplied in tape and reel packaging, SDQ12-3800, SDQ25-2900 parts
per reel, 13” diameter reel
Description
• 125°C maximum total temperature operation
• Dual winding inductors that can be used as either a single inductor, or
in coupled inductor/transformer applications (1:1 turns ratio)
• Windings can be connected in series or parallel, offering a broad range
of inductance and current ratings
• Current range from 6.43 to 0.063 Amps
• Inductance range from 0.47µH to 4.03mH
Low-Profile Dual Winding Shielded Inductor/Transformer
SDQ Series
06-13-08 SB-BU08352 Page 1 of 4 Data Sheet: 4339
SMD Device
PPaarraalllleell RRaattiinnggss SSeerriieess RRaattiinnggss
RRaatteedd PPaarrtt OOCCLL
((11))
II
rrmmss
((22))
II
ssaatt
((33))
DDCCRR
((44))
VVoollttss
((55))
OOCCLL
((11))
II
rrmmss
((22))
II
ssaatt
((33))
DDCCRR ΩΩ ((44)) VVoollttss
((55))
PPaarrtt IInndduuccttaannccee MMaarrkkiinngg ±±2200%% AAmmppss AAmmppss ((ΩΩ)) ttyypp.. µµ--SSeecc ±±2200%% AAmmppss AAmmppss ttyypp.. µµ--SSeecc
NNuummbbeerr ((µµHH)) ((µµHH)) ttyypp.. ((µµHH)) ttyypp..
SDQ12-R47-R 0.47 A 0.49±30% 2.78 4.34 0.0325 2.45 1.96±30% 1.39 2.17 0.1298 4.90
SDQ12-1R0-R 1 B 0.81 2.49 3.38 0.0403 3.15 3.24 1.25 1.69 0.1611 6.30
SDQ12-1R5-R 1.5 C 1.69 1.69 2.34 0.0870 4.55 6.76 0.847 1.17 0.3481 9.10
SDQ12-2R2-R 2.2 D 2.25 1.60 2.03 0.0977 5.25 9.00 0.800 1.01 0.3908 10.5
SDQ12-3R3-R 3.3 E 3.61 1.28 1.60 0.1527 6.65 14.44 0.640 0.800 0.6106 13.3
SDQ12-4R7-R 4.7 F 4.41 1.12 1.45 0.1990 7.35 17.64 0.560 0.724 0.7959 14.7
SDQ12-6R2-R 6.2 G 6.25 1.02 1.22 0.2387 8.75 25.00 0.512 0.608 0.9548 17.5
SDQ12-8R2-R 8.2 H 8.41 0.868 1.05 0.3318 10.15 33.64 0.434 0.524 1.33 20.3
SDQ12-100-R 10 J 9.61 0.831 0.981 0.3620 10.85 38.44 0.416 0.490 1.45 21.7
SDQ12-150-R 15 K 15.21 0.658 0.779 0.5766 13.65 60.84 0.329 0.390 2.31 27.3
SDQ12-220-R 22 L 22.09 0.548 0.647 0.8332 16.45 88.36 0.274 0.323 3.33 32.9
SDQ12-330-R 33 M 32.49 0.439 0.533 1.29 19.95 130.0 0.220 0.267 5.18 39.9
SDQ12-470-R 47 N 47.61 0.401 0.441 1.55 24.15 190.4 0.201 0.220 6.21 48.3
SDQ12-680-R 68 O 68.89 0.326 0.366 2.36 29.05 275.6 0.163 0.183 9.43 58.1
SDQ12-820-R 82 P 82.81 0.309 0.334 2.62 31.85 331.2 0.154 0.167 10.49 63.7
(1) Test Parameters: 100kHz,.0.25 Vrms 0.0Adc
(2) I
rms
: DC current for approximately ΔT of 40°C without core loss.It is recommended that the
temperature of the part not to exceed 125°C. Derating is necessary for AC currents
(3) I
sat
: Peak current for approximately 30% rolloff @20°C
(4) DCR limits @20°C
(5) Applied Volt-Time product (V-µS) across the inductor at 100kHz necessary to generate a core loss equal
to 10% of the total losses for a 40°C temperature rise. Derating of the I
rms
is required to
prevent excessive temperature rise.
Part Number Definition:
SDQ12-XXX-R
SDQ12 = Product code and Size
XXX = Inductance in uH, R = Decimal point
If no R is present, third character = # of zeros.
-R suffix indicated RoHS compliant