2
HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors
■
Product Specifi cations
Ratings
Rated Current 3A Operating Temperature Range -20ç~+85ç
Rated Voltage AC200V, DC250V Storage Temperature Range -10ç~+60ç
Items Specifi cations Conditions
1. Contact Resistance 20 mø or below Measured with DC 1 A
2.Insulation Resistance Minimum of 1,000 Mø Measured with DC 500 V
3. Withstanding Voltage No fl ashover or breakdown
10 pos. AC 900 V for 1 minute 2 pos. AC 1,500 V for 1 minute
4. Vibration Resistance
No electrical discontinuity of 10 µs or
greater
Tested in 3 directions with 10 to 500 Hz /cycle, total
vibration width of 0.75 mm, and 98 m/s
2
, 3 hours each.
5. Shock
No electrical discontinuity of 10 µs or
greater
Tested in 3 directions with the acceleration of 490 m/s
2
,
and a duration of 11 ms, 3 times each
6. Durability
Contact Resistance: Maximum of 30 m
ø 500 mating cycles
7. Temperature Cycles
Insulation Resistance: Minimum of 500 Mø
Left at
-
55ç: 30 minutes
⇒
Ordinary temperature: 2~3
minutes
⇒
85ç:30 minutes
⇒
Ordinary temperature: 2~3
minutes, 2~3 minutes, Total of 5 cycles
8. Humidity Resistance
Insulation resistance
Minimum of 50 M
ø
(high humidity)
Minimum of 500 M
ø
(dry)
Left at temperature 71ç and humidity 95% for 336 hours.
Left at the temperature of 71ç and 95% humidity for 336
hours.
9. Waterproof Structure
Should be no water leakage inside the
connector
Left submerged in water at the depth of 1 m, for 0.5 hours,
in the mated condition.
■
Materials
●Plug
Component Materials Finish Remarks
Outer Shell
Zinc Alloy, aluminum alloy and polyamide resin (black)
Nickel under plating ----------------------
Insulator PPS resin (black) ---------------------- UL94V-0
Female Contact Phosphorous bronze Gold plating ----------------------
O Ring, Gasket NBR, Nitrile hydride rubber ---------------------- ----------------------
●Receptacle
Component Materials Finish Remarks
Outer Shell Zinc alloy Nickel under plating ----------------------
Insulator PPS resin (black) ---------------------- UL94V-0
Male Contact 10 position Brass Gold plating ----------------------
O Ring NBR ---------------------- ----------------------
■
Product Number Structure
Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and
specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use.
●Plug
HR08D 12 WP A - 10 S
❶ ❷ ❸ ❹ ❺❻
❶
Model Name: HR08D series
❷
Shell Size: Diameter (mm) of the mating interface of the plug
❸
Shell Type
WP: Straight plug, WLP: Right angle plug
❹
Cord Tube and Cable Range Type
A: Material of cord tube: Metal, with cable dia. range of (
Ø
5.7 to 6.5)
B: Material of cord tube: Metal, with cable dia. range of (
Ø
6.5 to 7.3)
M: Material of cord tube: Plastic, with cable dia. range of (
Ø
5.7 to 6.5)
N: Material of cord tube: Plastic, with cable dia. range of (
Ø
6.5 to 7.3)
K: Material of cord tube: Metal, with cable dia. range of (
Ø
8.0 to 9.0)
❺
Number of Contacts: Contacts available (2 or 10)
❻
Contact Shape
S: Female contact for solder termination
SC: Female contact for crimping termination
● Receptacle
HR08D 12 WR - 10 P
❶ ❷ ❸ ❹❺
●Crimp contact
HR34B - SC1 - 2 1 1
❶ ❷ ❸❹❺
❶
Model Name: HR08D series
❷
Shell Size: Diameter (mm) of the mating interface of the plug
❸
Shell Type
WR
:
Receptacle
❹
Number of Contacts: Contacts available (10 only)
❺
Contact Shape P: Male contact for solder termination
❶
Model Name: HR34B series (Shares the same contacts
as the HR34B series)
❷
Contact Type SC1: Female contact
❸
Contact Shape 1: Single contact 2: Reel contact
❹
Barrel Shape: 1: 20-25 AWG
❺
Plating Type 1: Gold plating
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.