For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 33
Evaluation PCB
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
List of Materials for Evaluation PCB 104987
[1]
Item Description
J1 - J2 PCB Mount SMA RF Connector
J3 2 mm DC Header
C1 - C3 330 pF Capacitor, 0603 Pkg.
C4 2.2 μF Capacitor, Tantalum
U1 HMC407MS8G / HMC407MS8GE Ampli er
PCB
[2]
104628 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
HMC407MS8G / 407MS8GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 7 GHz
v03.1006
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
