www.panduit.com
Category 5e/Class D patch cords are constructed
of UTP 24 AWG stranded copper cable and a
modular plug at each end. Patch cords are used
in all work area outlets and patch panels. Patch
cords are wired to be compatible with both T568A
and T568B wiring schemes.
applications
Applications include:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token Ring 4/16
• Voice over internet protocol (VoIP)
NetKey
®
Category 5e UTP Patch Cords
NetKey
®
Category 5e Patch Cords
Foot lengths: NK5EPC3*Y
Meter lengths: NK5EPC1M^Y
NetKey
®
Category 5e
Jack Modules
Leadframe
module: NK5E88M**Y
Convenience
pack of 25
leadframe
modules: NK5E88M**-Q
Punchdown
module: NKP5E88M**
Convenience
pack of 25
punchdown
modules: NKP5E88M**-Q
NetKey
®
Category 5e Punchdown
Patch Panels
12-port: NK5EPPG12WY
24-port, 1 RU: NK5EPP24P
48-port, 2 RU: NK5EPP48P
*For standard lengths other than 3 feet (5, 7,
10, 14 or 20) change the length designation in
part number to the desired length. For standard
cable colors other than Off White, add suffix
BU (Blue), GR (Green), RD (Red) or
YL (Yellow) before the Y at the end of the part
number. For example, the part number for a
blue 5 foot patch cord is NK5EPC5BUY.
^For standard lengths other than 1 meter (2, 3,
4 or 5) change the length designation in part
number to the desired length. For standard
cable colors other than Off White, add suffix
BU (Blue), GR (Green), RD (Red) or
YL (Yellow) before the Y at the end of the part
number. For example, the part number for a
blue 5 meter patch cord is NK5EPC5MBUY.
**To designate a color, add suffix IW
(Off White), EI (Electric Ivory), IG (Int’l Gray),
WH (White), BL (Black), OR (Orange), RD
(Red), BU (Blue), GR (Green) or YL (Yellow).
NetKey
®
Network Components
DATA SHEET
technical information
Category 5e/Class D
performance:
Exceeds ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D
channel requirements at swept frequencies up to 100 MHz
Meets ANSI/TIA-568-C.2 and ISO 11801 Category 5e
component requirements at swept frequencies up to 100 MHz
Cable diameter:
0.215 in. (5.5mm) nominal
FCC compliance:
Complies with ANSI/TIA-1096A (formerly FCC Part 68); contacts
plated with 50 microinches of gold
IEC compliance:
Meets IEC 60603-7
PoE compliance:
Supports IEEE 802.3af/802.3at and proposed 802.3bt type 3 and
type 4 PoE applications
Safety compliance:
cULus Listed; UL 1863 and CAN/CSA-C22.2 (UL File E129886)
RoHS compliance:
Compliant
Flammability rating:
CM rated
key features and benefits
100% performance
tested
Confidence that each patch cord delivers specified performance
Patented tangle free
latch
Prevents snags and provides easy release
Identification
Provides identification of performance level, length, and quality
control number for future traceability
Variety of colors and
lengths available
Meets individual length and color-coding requirements
specifications
