HMC772LC4TR

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
3
HMC7 72LC4
v02.0514
GaAs HEMT MMIC LOW NOISE
AMPLIFIER, 2 - 12 GHz
Power Compression @ 12 GHz
Gain, Noise Figure & Power vs.
Supply Voltage @ 12 GHz
Output IP3 vs. Temperature
Reverse Isolation vs. Temperature
18
20
22
24
26
28
30
1 3 5 7 9 11 13 15
+25 C
+85 C
- 40 C
IP3 (dBm)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
1 3 5 7 9 11 13 15
+25 C
+85 C
- 40 C
ISOLATION (dB)
FREQUENCY (GHz)
-5
0
5
10
15
20
-20 -15 -10 -5 0 5
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
0
3
6
9
12
15
18
21
24
0
1
2
3
4
5
6
7
8
3.5 4 4.5
Gain
P1dB
Noise Figure
GAIN (dB), P1dB (dBm)
NOISE FIGURE (dB)
Vdd (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
4
HMC7 72LC4
v02.0514
GaAs HEMT MMIC LOW NOISE
AMPLIFIER, 2 - 12 GHz
Outline Drawing
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Drain Bias Voltage +5V
Drain Bias Current 60 mA
RF Input Power 5 dBm
Gate Bias Voltage -1 to 0.3 V
Continuous Pdiss (T = 85 °C)
(derate 5.8 mW/°C above 85 °C)
0.55 W
Thermal Resistance
(Channel to ground paddle)
172 °C/W
Channel Temperature 180 °C
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[2]
HMC772LC4 Alumina, White Gold over Nickel
MSL3
[1]
H772
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
5
HMC7 72LC4
v02.0514
GaAs HEMT MMIC LOW NOISE
AMPLIFIER, 2 - 12 GHz
Pin Number Function Description Interface Schematic
1, 2, 4 - 7, 12 - 15,
17 - 19, 24
GND
These pins and ground paddle
must be connected to RF/DC ground.
3 RFIN
This pin is AC coupled
and matched to 50 Ohms.
8 Vgg
Gate control for amplier. Please follow “MMIC Amplier
Biasing Procedure” application note. See application circuit
for required external components.
9 Vdd
Power Supply Voltage for the amplier. See application circuit
for required external components.
10, 11, 20 - 23 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
16 RFOUT
This pin is AC coupled
and matched to 50 Ohms.
Pin Descriptions
Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC772LC4TR

Mfr. #:
Manufacturer:
Analog Devices / Hittite
Description:
RF Amplifier lo Noise amp SMT, 2 - 12 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet