-DESCRIPTION
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20pin
(0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry
Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a
male header. The socket straddles the center of abreadboardorPerma-Proto and
then header plugs into the top of the socket. Since IDC cables are so standard, but
a royal pain to use with breadboards, this is a good and cheap hack for prototyping
Works best when soldered in place. We have used these to prototype on a
solderless breadboard but some customers report their breadboards don't play nice
with the shorter pins so your mileage may vary.
Each order comes with one socket and one header. Breadboard, Perma Proto and
IDC cable not included!
We also have helpersfor:
•2x16 Pins
•2x13 Pins
•2x8 Pins
•2x5 Pins
•2x3 Pins
11
27
201
htt
://www.adafruit.com/
roducts/2270
