Property Unit Requirement Test Method
PHYSICAL
Dimensions
LongitudinalChange
Inch(mm)
Percent
Asshownon
HT-200Dimensionstable
+0,-10maximum
ASTMD2671
NOTE1
TensileStrength
UltimateElongation
psi(MPa)
Percent
1500(10.3)minimum
250minimum
RW-1200,Section4.3.1
ASTMD2671
Concentricity(Expanded) Percent 70minimum ASTMD2671
SecantModulus(Expanded) psi(MPa) 2.5x10
4
(172)maximum ASTMD2671
SpecicGravity 2.0maximum ASTMD2671
LowTemperatureFlexibility
4hoursat-70°C±2°C(-94±4°F)
Nocracking AMS-DTL-23053,
Paragraph4.6.7.1
HeatShock
4hoursat300±3°C(482±5°F)
Nodripping,owingor
cracking
RW-1200,Table2
ASTMD2671
HeatResistance
168hoursat250±3°C(437±5°F)
Followedbytestsfor:
TensileStrength
Ultimateelongation
psi(MPa)
Percent
1200(8.3)minimum
200minimum
AMS-DTL-23053,
Paragraph4.6.9
RW-1200,Section4.3.1
ASTMD2671
VacuumOutgassing
TML(TotalMassLoss)
VCM(VolatileCondensibleMaterial)
Percent
Percent
1.0maximum
0.1maximum
NASASP-R-0022A
ClarityStability
24hoursat200±3°C(392±5°F)
Markinglegiblethrough
tubingwall(Clearonly)
AMS-DTL-23053
ELECTRICAL
DielectricStrength Volts/mil(V/mm) 500(19,700)minimum ASTMD2671
NOTE2
VolumeResistivity Ohm-cm 1X10
13
minimum ASTMD2671
CHEMICAL
CopperMirrorCorrosion
16hoursat175±2°C(347±4°F)
Non-corrosive ASTMD2671,
ProcedureA
Flammability
Selfextinguishing
within15seconds,
25%maximumagburn
ASTMD2671,
ProcedureC
FungusResistance Ratingof0 ASTMG21
WaterAbsorption
24hoursat23±3°C(73±5°F)
Percent 0.1maximum ASTMD2671
FluidResistance
24hoursat24±3°C(75±5°F)
JP-8Fuel(MIL-DTL-83133)
HydraulicFluid(MIL-PRF-5606)
LubricatingOil(MIL-PRF-23699)
LubricatingOil(MIL-PRF-7808)
SKYDROL500HydraulicFluid
SaltWater(5%NaCl,A-A-694)
De-icingFluid(AMS1424)
Water
Followedbytestsfor:
TensileStrength
UltimateElongation
psi(MPa)
Percent
1200(8.3)minimum
250
AMS-DTL-23053,
Paragraph4.6.11
ASTMD2671
PROPERTY REQUIREMENTS
HT-200TE Connectivity
While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly
disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
te.com/products/HT-200
1-1773730-2 APP 5/2014
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
© 2014 TE Connectivity Ltd. family of companies. All Rights Reserved.
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
NOTE1: Conditionthespecimensfor3minutesat200±3°C(392±5°F)andcooltoroomtemperaturebeforenalmeasurements.
NOTE2: Recoverthespecimenonthemetalmandrelsfor10minutes,minimum,at175±2°C(347±4°F)oruntilthetubingiscompletelyshrunkonthemandrels.
