3 10/08
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing and pin configuration
Technical data and measuring conditions
Rated voltage V
R
42 V AC (50/60 Hz) / 80 V DC
Rated temperature T
R
60 °C
Rated current I
R
Referred to 50 Hz and rated temperature
Rated inductance L
R
Measured with Agilent 4284A at 0.1 mA, 20 °C
Measuring frequency: L
R
≤ 1 mH = 100 kHz
L
R
>1mH= 10kHz
Inductance is specified per winding.
Inductance tolerance –30%/+50% at 20 °C
Inductance decrease ΔL/L
0
< 10% at DC magnetic bias with I
R
, 20 °C
Stray inductance L
stray,typ
Measured with Agilent 4284A at 5 mA, 20 °C, typical values
Measuring frequency: L
R
≤ 11 μH = 100 kHz
L
R
>11μH= 10kHz
DC resistance R
typ
Measured at 20 °C, typical values, specified per winding
Solderability (lead-free) Sn96.5Ag3.0Cu0.5: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
(260 ±5) °C, (10 ±1) s
(to IEC 60068-2-20, test Tb)
Climatic category 40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, ≤ 75% RH
Weight Approx. 0.4 g
IND0217-H
5±0.2
3 x 2.5±0.2
9.2±0.1
4.6 0.1
_
3±0.2
0.5 x 0.5
6.7±0.1
8765
1324
1234
7865
Tolerances to ISO 2768-M
unless otherwise noted.
Dimensions in mm
B82796C2Data and signal line chokes
Common-mode chokes, ring core