https://www.phoenixcontact.com/us/products/2736398
09/08/2014Page2/8
Distributed I/O device-FLS DN M12 DIO 8/8 M12-2736398
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Permissible humidity (storage/transport) 95 %
Air pressure (operation) 80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Degree of protection IP65/IP67
General
Weight 340 g
Mounting type Wall mounting
Protection class III, IEC 61140, EN 61140, VDE 0140-1
Test section To I/O 500 V AC 50 Hz 1 min
Mechanical tests
Shock in acc. with EN60068-2-27/IEC60068-2-27 Load 30g, half sine
wave, positive and negative per direction
Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g in each
space direction
Interfaces
Fieldbus system DeviceNet™
Designation DeviceNet™
Connection method 2 M12 connectors, A-coded
Transmission speed 125 kBit/s, 250 kBit/s, 500 kBit/s (Automatic baud rate detection)
Transmission physics Copper cable in acc. with DeviceNet™ specification
Address area assignment 0 ... 63, can be set
Number of positions 5
Power supply for module electronics
Connection method M12 connector, (A-coded)
Designation
U
L
Supply voltage 24 V DC
Supply voltage range 12 V DC ... 30 V DC (including ripple)
Fieldline potentials
Voltage supply U
L
24 V DC
Power supply at U
L
max. 4 A
Current consumption from U
L
typ. 60 mA
max. 100 mA
Voltage supply U
S
24 V DC
Power supply at U
S
max. 4 A
Current consumption from U
S
typ. 10 mA (plus sensor current)