ADG811/ADG812/ADG813
Rev. B | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 4.
Parameter Rating
V
DD
to GND −0.3 V to +4.6 V
Analog Inputs
1
−0.3 V to V
DD
+ 0.3 V
Digital Inputs
1
GND − 0.3 V to 4.6 V or
10 mA, whichever occurs first
Peak Current, S or D
(Pulsed at 1 ms, 10%
duty-cycle maximum)
3.3 V Operation 500 mA
2.5 V Operation 460 mA
1.8 V Operation 420 mA
Continuous Current, S or D
3.3 V Operation 300 mA
2.5 V Operation 275 mA
1.8 V Operation 250 mA
Operating Temperature Range,
Automotive (Y Version)
−40°C to +125°C
Storage Temperature Range −65°C to +150°C
Junction Temperature 150°C
TSSOP Package
θ
JA
Thermal Impedance 150°C/W
θ
JC
Thermal Impedance 27°C/W
LFCSP Package
θ
JA
Thermal Impedance 70°C/W
IR Reflow, Peak Temperature <20 sec 235°C
1
Overvoltages at IN, S, or D are clamped by internal diodes. Current should be
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating may be applied at any one
time.
Table 5. ADG811/ADG812 Truth Table
ADG811 IN ADG812 IN Switch Condition
0 1 On
1 0 Off
Table 6. ADG813 Truth Table
Logic Switch 1, Switch 4 Switch 2, Switch 3
0 Off On
1 On Off
ESD CAUTION