UG2001 - UG2007
Document number: DS27009 Rev. 5 - 3
1 of 4
www.diodes.com
October 2010
© Diodes Incorporated
UG2001 - UG2007
NOT RECOMMENDED
FOR NEW DESIGN
2.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER
Features
• Glass Passivated Die Construction
• Ultra-Fast Switching for High Efficiency
• Surge Overload Rating to 60A Peak
• Low Reverse Leakage Current
• Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
• Case: DO-15
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Finish - Tin. Plated Leads Solderable per
• MIL-STD-202, Method 208
• Polarity: Cathode Band
• Marking: Type Number
• Ordering Information: See Page 3
• Weight: 0.4 grams (approximate)
Maximum Ratings @T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol UG2001 UG2002 UG2003 UG2004 UG2005 UG2006 UG2007 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
V
RRM
V
RWM
V
R
50 100 200 400 600 800 1000 V
RMS Reverse Voltage
V
R
RMS
35 70 140 280 420 560 700 V
Average Rectified Output Current @T
A
= 55°C (Note 1) I
O
2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
I
FSM
60 A
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance Junction to Ambient
R
JA
50 °C/W
Operating and Storage Temperature Range
T
J,
T
STG
-55 to +150
°C
Electrical Characteristics @T
A
= 25°C unless otherwise specified
Characteristic Symbol UG2001 UG2002 UG2003 UG2004 UG2005 UG2006 UG2007 Unit
Forward Voltage @ I
F
= 2.0A V
F
1.0 1.3 1.7 V
Peak Reverse Current @ T
A
= 25°C
at Rated DC Blocking Voltage (Note 5) @ T
A
= 100°C
I
R
5.0
100
μA
Typical Total Capacitance (Note 2)
C
T
30 15 pF
Reverse Recovery Time (Note 3)
t
r
50 75 ns
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with I
F
= 0.5A, I
R
= 1.0A, I
rr
= 0.25A. See figure 5.
4. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
5. Short duration pulse test used to minimize self-heating effect.