2
FN6283.0
February 13, 2007
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only.
Absolute Maximum Ratings (T
A
= +25°C) Thermal Information
Supply Voltage from VSP to GND . . . . . . . . . . . . . . . . . . . . . . . . 6V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . V
S
+ +0.3V to GND -0.3V
Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . .+135°C
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .6000V
Machine Model (Per EIAJ ED-4701 Method C-111). . . . . . . .300V
Thermal Resistance (Typical) θ
JA
(°C/W)
6 Ld SC-70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device.
Electrical Specifications V
SP
= +5V, Z
RSC
= Z
LOAD
= 50Ω, T
A
= +25°C, 24Ω V
SP
to OUT, unless otherwise specified.
PARAMETER DESCRIPTION CONDITIONS MIN TYP MAX UNIT
V
SP
Supply Voltage To operate below 5V, the 24Ω resistor to
supply should be reduced
3.0 5.5 V
Gt Small Signal Gain 1.0GHz 10.6 11.8 13.1 dB
1.5GHz 10 11.2 12.5 dB
2.0GHz 9.8 11.2 12.3 dB
P1dB Output Power at 1dB Compression 1.0GHz 15.9 17.4 18.9 dBm
2.0GHz 15.5 17 18.5 dBm
OIP3 Output Third Order Intercept Point 1.0GHz 31.5 dBm
2.0GHz 28.3 dBm
OIP2 Output Second Order Intercept Point Input tones at 1.0GHz and 1.1GHz, at Input
Power = -15dBm, Output tone 2.1GHz
49.1 dBm
BW 3dB Bandwidth 3dB below Gain @ 500MHz 2.8 GHz
IRL Input Return Loss 1.0GHz 15.8 dB
ORL Output Return Loss 1.0GHz 15.9 dB
RISOL Reverse Isolation 2.0GHz 17.8 dB
NF Noise Figure 2.0GHz 5.0 dB
ID Device Operating Current 54 62.3 69 mA
ISL55013
