56
020516
TLJ Series
Tantalum Solid Electrolytic Chip Capacitors
High CV Consumer Series
TEST
TLJ series (Temperature range -55ºC to +125ºC)
Condition Characteristics
Visual examination no visible damage
DCL 2 x initial limit
Endurance
ΔC/C within ±10% of initial value
ESR 1.25 x initial limit
Visual examination no visible damage
Humidity
DCL 2 x initial limit
ΔC/C within ±10% of initial value
ESR 1.25 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
Temperature DCL
2 x
IL* n/a 2 x IL* 20 x IL* 25 x IL* IL*
Stability
ΔC/C
n/a +0/-20% ±5% +20/-0% +25/-0% ±5%
ESR
1.25 xIL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination no visible damage
Surge DCL 2 x initial limit
Voltage
ΔC/C within ±5% of initial value
ESR 1.25 x initial limit
Determine after application of rated voltage for
2000 +48/-0 hours at 40±2ºC and then leaving 1-2
hours at room temperature. Also determine of 85ºC
temperature, category voltage for 2000 +48/-0
hours and then leaving 1-2 hours at room tempera-
ture. Power supply impedance to be
≤0.1Ω/V.
Determine after storage without applied voltage at
65±2ºC and 90-95% relative humidity for 500hrs
and then recovery 1-2 hours at room temperature
Test temperature: 40ºC+3/0ºC
Test voltage: 1.3 x rated voltage
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +125+3/-0 15
6 +20±2 15
*Initial Limit
QUALIFICATION TABLE – CATEGORY 1
TEST
TLJ series (Temperature range -55ºC to +125ºC)
Condition Characteristics
Visual examination no visible damage
DCL 2 x initial limit
Endurance
ΔC/C within +5/-30% of initial value
ESR 1.25 x initial limit
Visual examination no visible damage
Humidity
DCL 2 x initial limit
ΔC/C within ±10% of initial value
ESR 1.25 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +20ºC
Temperature DCL
2 x
IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL*
Stability
ΔC/C
n/a +5/-20% ±10% +20/-0% +25/-0% ±10%
ESR
1.25 xIL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination no visible damage
Surge DCL 2 x initial limit
Voltage
ΔC/C within ±5% of initial value
ESR 1.25 x initial limit
Determine after application of rated voltage for
2000 +48/-0 hours at 40±2ºC and then leaving 1-2
hours at room temperature. Also determine of 85ºC
temperature, category voltage for 2000 +48/-0
hours and then leaving 1-2 hours at room tempera-
ture. Power supply impedance to be
≤0.1Ω/V.
Determine after storage without applied voltage at
65±2ºC and 90-95% relative humidity for 500hrs
and then recovery 1-2 hours at room temperature
Test temperature: 40ºC+3/0ºC
Test voltage: 1.3 x rated voltage
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration(min)
1 +20±2 15
2 -55+0/-3 15
3 +20±2 15
4 +85+3/-0 15
5 +125+3/-0 15
6 +20±2 15
*Initial Limit
QUALIFICATION TABLE – CATEGORY 2
