2703017 Datasheet 2703017 | P1-P3

https://www.phoenixcontact.com/us/produkte/2703017

10.10.2012Page1/6

Transformer terminal block-TRK 10 GY-2703017

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

Transformer terminal block, Connection method:Screw connection, Length:36.7 mm, Width:18.6

mm, Height:35.1 mm, Color:gray, Mounting type:DIN rail,Coil snap-in device

The figure shows the version in

orange



Key commercial data

Packing unit 1

Minimum order quantity 1

GTIN

Custom tariff number 85369010

Country of origin GREECE

Technical data

General

Note

For transformers on ships, saltwater-proof DIN rails must be used

according to the regulations of Germanic Lloyd. This requirement

is fulfilled by all rail designs.

Note

When selecting the type of connection on safety transformers

in acc. with IEC 742/EN 60742/DIN VDE 0551-1, please

observe:<br />- When safety transformers are used as self-

contained devices, only screw connections are permitted for the

external connections.<br />- When installing safety transformers,

the specifications of the respective devices must be observed.

Number of connections 2

Color gray

Insulating material PA

Inflammability class according to UL 94 V0

Dimensions

Width 18.6 mm

Length 36.7 mm

Height 35.1 mm

Technical data

https://www.phoenixcontact.com/us/produkte/2703017

10.10.2012Page2/6

Transformer terminal block-TRK 10 GY-2703017

Technical data

Rated surge voltage 8 kV

Rated insulation voltage 800 V

Pollution degree 3

Surge voltage category III

Connection in acc. with standard IEC / EN

Nominal current IN 32 A

Nominal voltage UN (voltage data only possible in conjunction with transformer)

Number of positions 1

Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11

Back of the hand protection guaranteed

Finger protection guaranteed

Surge voltage test setpoint 9.8 kV

Result of surge voltage test Test passed

Power frequency withstand voltage setpoint 2 kV

Result of power-frequency withstand voltage test Test passed

Checking the mechanical stability of terminal points (5 x conductor

connection)

Test passed

Bending test rotation speed 10 rpm

Bending test turns 135

Bending test conductor cross section/weight 2.5 mm² / 0.7 kg

Bending test conductor cross section/weight 4 mm² / 0.9 kg

Bending test conductor cross section/weight 10 mm² / 2 kg

Result of bending test Test passed

Conductor cross section tensile test 2.5 mm²

Tractive force setpoint 160 N

Conductor cross section tensile test 4 mm²

Tractive force setpoint 60 N

Conductor cross section tensile test 10 mm²

Tractive force setpoint 90 N

Tensile test result Test passed

Requirements, voltage drop ≤ 3.2 mV

Result of voltage drop test Test passed

Temperature-rise test Test passed

Conductor cross section short circuit testing 10 mm²

Short-time current 1.2 kA

Short circuit stability result Test passed

Proof of thermal characteristics (needle flame) effective duration 30 s

Result of thermal test Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 1, class B, on vehicle body

Test frequency f1 = 5 Hz to f2 = 150 Hz

ASD level 0.02 g²/Hz

Acceleration 0.8 g

https://www.phoenixcontact.com/us/produkte/2703017

10.10.2012Page3/6

Transformer terminal block-TRK 10 GY-2703017

Technical data

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Oscillation, broadband noise test result Test passed

Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03

Shock form Half-sine

Acceleration 5 g

Shock duration 30 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Shock test result Test passed

Temperature index, insulating material (DIN EN 60216-1 (VDE

0304-21))

125 °C

Connection data

Conductor cross section solid min. 2.5 mm²

Conductor cross section solid max. 10 mm²

Conductor cross section stranded min. 4 mm²

Conductor cross section stranded max. 10 mm²

Conductor cross section AWG/kcmil min. 14

Conductor cross section AWG/kcmil max 8

Conductor cross section stranded, with ferrule without plastic

sleeve min.

2.5 mm²

Conductor cross section stranded, with ferrule without plastic

sleeve max.

6 mm²

Conductor cross section stranded, with ferrule with plastic sleeve

min.

2.5 mm²

Conductor cross section stranded, with ferrule with plastic sleeve

max.

6 mm²

2 conductors with same cross section, solid min. 2.5 mm²

2 conductors with same cross section, solid max. 10 mm²

2 conductors with same cross section, stranded min. 4 mm²

2 conductors with same cross section, stranded max. 10 mm²

2 conductors with same cross section, stranded, ferrules without

plastic sleeve, min.

2.5 mm²

2 conductors with same cross section, stranded, ferrules without

plastic sleeve, max.

6 mm²

2 conductors with same cross section, stranded, TWIN ferrules

with plastic sleeve, min.

1.5 mm²

2 conductors with same cross section, stranded, TWIN ferrules

with plastic sleeve, max.

4 mm²

Connection method Screw connection

Stripping length 16 mm

Internal cylindrical gage A4

Screw thread M5

Tightening torque, min 4 Nm

P1-P3 P4-P6

2703017

Mfr. #:

Buy 2703017

Manufacturer:

Phoenix Contact

Description:

DIN Rail Terminal Blocks TRK 10 GY

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2703017