Document Number: 83503 For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com
Rev. 2.3, 14-Oct-09 811
TCET1100, TCET1100G
Optocoupler, Phototransistor Output,
High Temperature
Vishay Semiconductors
Note
G = lead form 10.16 mm; G is not marked on the body
Notes
(1)
T
amb
= 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
(2)
Refer to wave profile for soldering conditions for through hole devices (DIP).
ORDER INFORMATION
PART REMARKS
TCET1100 CTR 50 % to 600 %, DIP-4
TCET1101 CTR 40 % to 80 %, DIP-4
TCET1102 CTR 63 % to 125 %, DIP-4
TCET1103 CTR 100 % to 200 %, DIP-4
TCET1104 CTR 160 % to 320 %, DIP-4
TCET1105 CTR 50 % to 150 %, DIP-4
TCET1106 CTR 100 % to 300 %, DIP-4
TCET1107 CTR 80 % to 160 %, DIP-4
TCET1108 CTR 130 % to 260 %, DIP-4
TCET1109 CTR 200 % to 400 %, DIP-4
TCET1100G CTR 50 % to 600 %, DIP-4, 400 mil
TCET1101G CTR 40 % to 80 %, DIP-4, 400 mil
TCET1102G CTR 63 % to 125 %, DIP-4, 400 mil
TCET1103G CTR 100 % to 200 %, DIP-4, 400 mil
TCET1104G CTR 160 % to 320 %, DIP-4, 400 mil
TCET1105G CTR 50 % to 150 %, DIP-4, 400 mil
TCET1106G CTR 100 % to 300 %, DIP-4, 400 mil
TCET1107G CTR 80 % to 160 %, DIP-4, 400 mil
TCET1108G CTR 130 % to 260 %, DIP-4, 400 mil
TCET1109G CTR 200 % to 400 %, DIP-4, 400 mil
ABSOLUTE MAXIMUM RATINGS
(1)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V
R
6V
Forward current I
F
60 mA
Forward surge current t
p
≤ 10 µs I
FSM
1.5 A
OUTPUT
Collector emitter voltage V
CEO
70 V
Emitter collector voltage V
ECO
7V
Collector current I
C
50 mA
Collector peak current t
p
/T = 0.5, t
p
≤ 10 ms I
CM
100 mA
COUPLER
Isolation test voltage (RMS) t = 1 min V
ISO
5000 V
RMS
Operating ambient temperature range T
amb
- 40 to + 100 °C
Storage temperature range T
stg
- 55 to + 125 °C
Soldering temperature
(2)
2 mm from case, ≤ 10 s T
sld
260 °C