Description
The HCPL-260L/060L/263L/063L are optically coupled
gates that combine a GaAsP light emitting diode and
an integrated high gain photo detector. An enable in-
put allows the detector to be strobed. The output of
the detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed
common mode transient immunity specication of
15 kV/µs at 3.3V.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compati-bili-
ty. The optocoupler AC and DC operational parameters
are guaranteed from –40 °C to +85 °C allowing trouble-
free system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
HCPL-260L/060L/263L/063L
High Speed LVTTL Compatible 3.3 V Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Features
3.3V/5V Dual Supply Voltages
Low power consumption
15 kV/µs minimum Common Mode Rejection (CMR) at
V
CM
= 1000 V
High speed: 15 MBd typical
LVTTL/LVCMOS compatible
Low input current capability: 5 mA
Guaranteed AC and DC performance over tempera-
ture: –40 °C to +85 °C
Available in 8-pin DIP, SOIC-8
Strobable output (single channel products only)
Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5
Applications
Isolated line receiver
Computer-peripheral interfaces
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
Switching power supply
Instrument input/output isolation
Ground loop elimination
Pulse transformer replacement
Field buses
Truth Table
(Positive Logic)
LED Enable Output
ON H L
OFF H H
ON L H
OFF L H
ON NC L
OFF NC H
Truth Table
(Positive Logic)
LED Output
ON L
OFF H
1
2
3
4
8
7
6
5
CATHODE
ANODE
GND
V
V
CC
O
1
2
3
4
8
7
6
5
ANODE 2
CATHODE 2
CATHODE 1
ANODE 1
GND
V
V
CC
O2
V
E
V
O1
HCPL-260L/060L HCPL-263L/063L
NC
NC
SHIELD SHIELD
2
Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577
Part number
Option
Package
Surface
Mount
Gull
Wing
Tape
& Reel
UL 5000
Vrms/ 1 Min-
ute rating
IEC/EN/DIN
EN 60747-5-5 Quantity
RoHS
Compliant
Non RoHS
Compliant
HCPL-260L
-000E No option
300mil
DIP-8
50 per tube
-300E -300 X X 50 per tube
-500E #500 X X X 1000 per reel
-020E -020 X 50 per tube
-320E -320 X X X 50 per tube
-520E -520 X X X X 1000 per reel
-060E #060 X 50 per tube
-560E #560 X X X X 1000 per reel
HCPL-263L
-000E No option
300mil
DIP-8
50 per tube
-300E #300 X X 50 per tube
-500E #500 X X X 1000 per reel
-020E #020 X 50 per tube
-320E -320 X X X 50 per tube
-520E #520 X X X X 1000 per reel
-060E -060 X 50 per tube
-560E -560 X X X X 1000 per reel
HCPL-060L
-000E No option
SO-8
X 100 per tube
-500E #500 X X 1500 per reel
-060E #060 X X 100 per tube
-560E -560 X X X 1500 per reel
HCPL-063L
-000E No option
SO-8
X 100 per tube
-500E #500 X X 1500 per reel
-060E -060 X X 100 per tube
-560E -560 X X X 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry. Combination of Option 020 and Option 060 is not available.
Example 1:
HCPL-260L-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Example 2:
HCPL-263L to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
3
Schematic
Package Outline Drawings
8-Pin DIP Package
SHIELD
8
6
5
2+
3
V
F
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED (SEE NOTE 5).
I
F
I
CC
V
CC
V
O
GND
I
O
V
E
I
E
7
HCPL-260L/060L
SHIELD
8
7
+
2
V
F1
I
F1
I
CC
V
CC
V
O1
I
O1
1
SHIELD
6
5
4
V
F2
+
I
F2
V
O2
GND
I
O2
3
HCPL-263L/063L
1.080 ± 0.320
(0.043 ± 0.013)
2.54 ± 0.25
(0.100 ± 0.010)
0.51 (0.020) MIN.
0.65 (0.025) MAX.
4.70 (0.185) MAX.
2.92 (0.115) MIN.
5° TYP.
0.254
+ 0.076
- 0.051
(0.010
+ 0.003)
- 0.002)
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
9.65 ± 0.25
(0.380 ± 0.010)
1.78 (0.070) MAX.
1.19 (0.047) MAX.
DIMENSIONS IN MILLIMETERS (INCHES).
5678
4321
*MARKING CODE LETTER FOR OPTION NUMBERS
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
EEE
NNNN
YYWW
A
TEST RATING CODE
Z
P
DEVICE PART NUMBER
UL LOGO
SPECIAL PROGRAM CODE
LEAD-FREE
AVAGO
LOT ID
DATE CODE
PIN 1

HCPL-063L-000E

Mfr. #:
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 15MBd 2Ch 5mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union