Cable
76000129
(2’)
76000195
(4’)
61020024
61020048
DB-25 M Straight
Modems and other DCE
devices with DB-25 female
ports
Adapter
(4-Pack)
76000700
NA
Cable
76000198
(2’)
76000199
(4’)
61030024
61030048
DB-25 F Straight
Modems and other DCE
devices with DB-25 male
ports
Adapter None NA
Cable 76000643 (2’) 63000196-01
DB-25 M * Special *
For use with printers. This
cable utilizes the DTR signal
(instead of RTS) for
hardware flow control.
Adapter
(4-Pack)
76000692
NA
Cable
76000631
(6’)
76000632
(qty 8)
76000633
(qty 16)
63000222-02
RJ-45 M * Special *
For use with Cisco and Sun
RJ-45 console ports.
Adapter None NA
Notes:
All RJ-45 to DBx cables are 10-pin. Only the RJ-45 to RJ-45 cable is an 8-pin cable.
All RJ-45 adapters are 8-pin. When using these adapters with modems or other applications that require DCD on
pin 1, you must turn on altpin.
If altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD. This alternative can be used if
DCD is not required, and DSR is needed instead.
© 2004 Digi International Inc.
Digi, Digi International, the Digi logo, the Digi Connectware logo, Digi One and PortServer are trademarks or registered trademarks of Digi International,
Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
