LT1057/LT1058
16
10578fd
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
●
FAX: (408) 434-0507
●
www.linear.com
LINEAR TECHNOLOGY CORPORATION 1989
LT 0812 REV D • PRINTED IN USA
RELATED PARTS
TYPICAL APPLICATION
PART NUMBER DESCRIPTION COMMENTS
LT1055/6 Precision, High Speed, JFET Input
Operational Amplifiers
12V/µs Slew Rate, 5.5MHz Bandwidth
LT1880 SOT-23, Rail-to-Rail Output, Picoamp Input
Precision Op Amps
150µV Max Offset Voltage, 900pA Max Input Bias Current
LT1881/2 Dual and Quad Rail-to-Rail Output, Picoamp Input
Precision Op Amps
50µV Max Offset Voltage, 200pA Max Input Bias Current
LT1884/5 Dual/Quad Rail-to-Rail Output, Picoamp Input
Precision Op Amps
50µV Max Offset Voltage, 400pA Max Input Bias Current
LT6010 135µA, 14nV/rtHz, Rail-to-Rail Output, Precision
Low Power Op Amp with Shutdown
35µV Max Offset Voltage, 300pA Max Input Bias Current
LT6011/12 Dual/Quad 135µA, 14nV/rtHz, Rail-to-Rail Output
Precision Low Power Op Amp
60µV Max Offset Voltage, 300pA Max Input Bias Current
LTC6078/9 Micropower Precision, Dual/Quad CMOS
Rail-to-Rail Input/Output Amplifiers
Maximum Offset Drift: 0.7µV/°C
LTC6241/2 Dual/Quad 18MHz, Low Noise, Rail-to-Rail
CMOS Op Amps
O.1Hz to 10Hz Noise: 550n Vpp
NOTE 3
.398 – .413
(10.109 – 10.490)
NOTE 4
16
15 14
13
12
11
10 9
1
N
23
4
5
6
78
N/2
.394 – .419
(10.007 – 10.643)
.037 – .045
(0.940 – 1.143)
.004 – .012
(0.102 – 0.305)
.093 – .104
(2.362 – 2.642)
.050
(1.270)
BSC
.014 – .019
(0.356 – 0.482)
TYP
0° – 8° TYP
NOTE 3
.009 – .013
(0.229 – 0.330)
.005
(0.127)
RAD MIN
.016 – .050
(0.406 – 1.270)
.291 – .299
(7.391 – 7.595)
NOTE 4
× 45°
.010 – .029
(0.254 – 0.737)
INCHES
(MILLIMETERS)
NOTE:
1. DIMENSIONS IN
2. DRAWING NOT TO SCALE
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.420
MIN
.325 ±.005
RECOMMENDED SOLDER PAD LAYOUT
.045 ±.005
N
123 N/2
.050 BSC
.030 ±.005
TYP
SW Package
16-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
