Type 4X Stainless Steel Wallmount Enclosure
1418 N4
SS Series
Continuous Hinge Door with Clamps
Application
Designed for use as instrument enclosures, electric, hydraulic or pneumatic
control housings, electrical junction boxes or terminal wiring enclosures.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in specific applications where corrosion is a serious problem.
Standards
UL 508 Type 3R, 4, 4X, and 12
CSA Type 3R, 4, 4X, and 12
Complies with
NEMA Type 3R, 4, 4X, 12 and 13
JIC EGP-1-1967 unless marked¹
IEC 60529, IP66
Construction
Formed 14 gauge 304 or 316 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Door stiffeners are provided in the larger enclosures for extra rigidity.
Welded brackets provide for enclosure mounting.
Formed lip on door and enclosure excludes flowing liquids and
contaminants.
Stainless steel continuous hinge on door may be removed by pulling the
stainless steel hinge pin.
Door is secured with easily operated stainless steel clamps.
Provision for padlocking.
Seamless poured-in place gasket.
A removable 12 gauge inner panel is included.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in
the enclosure.
A literature pocket is provided for the inside of the door.
Finish
Cover and enclosure are natural stainless steel with a smooth brushed
finish.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.