OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DE11XRA150KN4AQ01F

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
Reference only
ETP1N401A
15 / 16
7. Taping specification
7-1. Dimension of capacitors on tape
Vertical crimp taping type < Lead code : N4 >
Pitch of component 25.4mm / Lead spacing 10.0mm
Unit : mm
Item Code Dimensions Remarks
Pitch of component
P 25.42.0
Pitch of sprocket hole
P0 12.70.3
Lead spacing
F 10.01.0
Length from hole center to lead
P1 7.71.5
Body diameter
D
Please refer to [ Part number list ].
Deviation along tape, left or right
S 02.0
They include deviation by lead bend .
Carrier tape width
W 18.00.5
Position of sprocket hole
W1 9.00.5
Deviation of tape width direction
Lead distance between reference and
bottom planes
H0 18.0
Protrusion length
0.51.0
Diameter of sprocket hole
D0 4.00.1
Lead diameter
d 0.600.05
Total tape thickness
t1 0.60.3
They include hold down tape thickness.
Total thickness, tape and lead wire
t2 1.5 max.
Deviation across tape, front
h1
2.0 max.
Deviation across tape, rear
h2
Portion to cut in case of defect
L 11.0
Hold down tape width
W0 11.5 min.
Hold down tape position
W2 1.51.5
Coating extension on lead
e
Up to the end of crimp
Body thickness
T
Please refer to [ Part number list ].
2.0
0
0
1.0
Reference only
ETP2D03
16 / 16
7-2. Splicing way of tape
1) Adhesive force of tape is over 3N at test condition as below.
2) Splicing of tape
a) When base tape is spliced
Base tape should be spliced by cellophane tape.
(Total tape thickness should be less than 1.05mm.)
b) When hold down tape is spliced
Hold down tape should be spliced with overlapping.
(Total tape thickness should be less than 1.05mm.)
ape are spliced
Base tape and adhesive tape should be spliced with splicing tape.
c) When both tape are spliced
Base tape and hold down tape should be spliced with splicing tape.
3 ) Missing components
There should be no consecutive missing of more than three components.
The number of missing components should be not more than 0.5% of
total components that should be present in a Ammo pack.
Hold down tape
Base tape
W
Unit : mm
Progress direction
in production line
Hold down tape
Base tape
Cellophane tape
A
bout 30 to 50
Progress direction
in production line
Hold down tape
Base tape
20 to 60
Unit : mm
No lifting for the direction of
progressing
Appendix
EU RoHS and Halogen Free
This products of the following crresponds to EU RoHS and Halogen Free　
(1) RoHS
　EU RoHs 2011/65/EC compliance　
　maximum concentration values tolerated by weight in homogeneous materials
　・1000 ppm maximum Lead
　・1000 ppm maximum Mercury
　・100 ppm maximum Cadmium
　・1000 ppm maximum Hexavalent chromium
　・1000 ppm maximum Polybrominated biphenyls (PBB)
　・1000 ppm maximum Polybrominated diphenyl ethers (PBDE)
(2) Halogen-Free
　The Inte
rnational Electrochemical Commission’s (IEC) Definition
　of Halogen-Free (IEC 61249-2-21) compliance
　
　・900 ppm maximum chlorine
　・900 ppm maximum bromine
　・1500 ppm maximum total chlorine and bromine
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

DE11XRA150KN4AQ01F

Mfr. #:
Buy DE11XRA150KN4AQ01F
Manufacturer:
Murata Electronics
Description:
Safety Capacitors 10x6x6mm 500Vac 15pF
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet