NCP58302DSADGEVB Datasheet NCP58302DSADGEVB | P1-P3

7/17/2012 - 1 - www.onsemi.com

Test Procedure for the NCP58302DSADGEVB Evaluation Board

Figure 1: Test Setup

Test Procedure:

1. Connect the test setup as shown in Figure 1.

2. Apply an input voltage, Vin = 3.5 V dc

3. Apply Iout = 10 mA load.

4. Check that Vout is 2.5 V

5. Increase Iout load to 3.0 A

6. Check that Vout is 2.5 V

7. Power down the load

8. Power down Vin

9. End of test

ELECTRONIC

LOAD

REGULATED DC

SUPPLY

Mfr. #:

Manufacturer:

ON Semiconductor

Description:

Power Management IC Development Tools NCP58302 ADJ EVB

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union