Type 12 Mild Steel Multi-Door Freestanding Enclosure
1422 MD
Series
Continuous Hinge Door with Handle
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls
and instruments.
Provides a degree of protection from falling dirt, dust, oil and water.
Standards
UL 508 Type 12
CSA Type 12
Complies with
NEMA Type 12
JIC EGP-1-1967
IEC 60529, IP54
Construction
Formed 10 gauge steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Heavy duty body stiffeners are provided for extra rigidity.
Reinforced eyebolts are provided for easy enclosure lifting.
Double door openings have gasketed overlapping doors, eliminating the
need for a center post.
Continuously hinged doors may be removed by pulling the hinge pin.
Doors are secured with a three point padlocking handle.
Latch rods are equipped with rollers for easier door closing.
Oil resistant gaskets are permanently secured.
Removable 10 gauge inner panels are included in the enclosures.
3 door units have 2 panels (34" x 78" and 70" x 78").
4 door units have 2 panels (70" x 78" each).
Slave doors have mechanical interlock and cannot be opened unless the
master door is open.
Panel supports are provided in enclosures for easy panel installation.
Collar studs are provided for mounting inner panels.
A grounding stud is provided in the enclosure for each door and a bonding
stud is provided on the door.
A literature pocket is provided for the inside of the door.
Finish
Cover and enclosure are finished in recoatable smooth ANSI 61 gray
powder coating on the outside, with white powder coating on the inside.
Removable inner panels are finished in white powder coating.
Accessories
Quality Products. Service Excellence.
