OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PESV1A

P1-P2
PES1A/PESV1A-0712 - 1/2
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-
5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PPRODUCT INFORMATION B&B ELECTRONICS
Models: PES1A, PESV1A
Serial Server with Power over Ethernet
(PoE)
Description
Power-over-Ethernet technology is a new Ethernet extension intended to eliminate the
cost and clutter of power supplies. Using PoE, power is injected by the Ethernet switch
or Ethernet midspan device onto the Ethernet cable itself. With PoE, specially designed
Ethernet devices can draw their power through the Ethernet cable eliminating the need for separate wall-transformers
and power cords. Both PES1A and PESV1A offers RS-232 serial server with PoE. Additionally PESV1A adds 3
selectable power outputs for your end device.
Selectable power: While these units comply fully with the IEEE 802.3af standard governing PoE transmissions, there is
no standard for the power to serial devices such as bar code scanners, slip printers or other devices. This creates a
challenge for the system integrator, VAR, OEM and customer. To counter this, variable voltage levels are built into the
serial servers, selectable by switch or the built-in web server (PESV1A only). They can meet virtually any DC voltage
requirement, with power up to 4 W (125mA max in rush).
Features
Transparent 10/100Mbps operation
Auto-detects the power requirement
Compatible with IEEE 802.3af
Current limited ports for short circuit protection
Benefits
RJ45 10/100BaseT auto-sensing interfaces
Supports the IEEE 802.3af standard for Power-over-Ethernet
Simple plug & play operation
Single RS-232, DB9 serial interface
Adjustable output power: 5, 9 or 12 VDC hardware selectable (PESV1A only @ 4 W max)
Compact size: PES1A: 0.9 x 1.6 x 3.8 in, PESV1A: 1.0 x 2.8 x 5.1 in
Applications
p
Retail/POS
Building
automation/security
Convenience
store/gas station
Telecom VoIP
PES1A/PESV1A-0712 - 2/2
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-
5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
PPRODUCT INFORMATION B&B ELECTRONICS
Specifications
LAN interface: IEEE 802.3, IEEE 802.3af (spare or data pair)
Data rate: 10BaseT, 100BaseTX (auto detecting)
Data mode: Full or half duplex (auto detecting)
Protocols supported: TCP, UDP, DHCP, SNMP, SSL/TLS, TELNET, RLOGIN, RFC 2217, LPD,
HTTP/HTTPS, SMTP, ICMP, IGMP, ARP
LAN connector: RJ45 - 8 pin
Serial support: TD, RD, RTS, CTS, DTR, DCD, DSR, GND
Serial baudrate: 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 3600, 4800, 9600, 14400,
19200, 28800, 38400, 57600, 115200, 230400
Serial connector: DB9 male
Data bit: 5, 6, 7, 8
Data parity: Mark, space, none, even, odd
Stop bit: 1, 2
Flow control: none, RTS/CTS, XON/XOFF
Management: Web browser
Client software: Virtual COM port driver, discovery software
VCOM O/S: Windows 98, ME, 2K, XP, NT 4.0, Vista
Communication mode: Virtual COM port mode, direct IP mode, pair mode
Power input: 48 VDC via PoE Class 3
Power output (PESV1A): 2 position terminal block
5, 9, or 12VDC (slide switch selectable) @ 4W max (125mA in rush max)
LEDs: Power (red – PESV1A only)
LAN link (yellow)
Data activity (green)
Operating temperature: 0° to 70° C (32° to 158° F)
Storage temperature: -40° to 85° C (-40° to 185° F)
Relative humidity: 10 to 90% non-condensing
Certifications: FCC, CE
Dimensions: PES1A 0.9 x 1.6 x 3.8 in (2.3 x 4.1 x 9.7 cm)
PESV1A 1.0 x 2.8 x 5.1 in (2.5 x 7.1 x 13.0 cm)
P1-P2

PESV1A

Mfr. #:
Buy PESV1A
Manufacturer:
B+B SmartWorx
Description:
Interface Modules POE ETH TO RS232 CON & ADJ POW
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet