date
page
12/2014
1 of 4
20050 SW 112
th
Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 www.cui.com
SERIES: DESCRIPTION:
mechanical incremental encoder
ACZ16
ELECTRICAL SPECIFICATIONS
parameter conditions/description
output waveform square wave
output signals A, B phase
current consumption 0.5 mA
output phase difference T1, T2, T3, T4 ≥ 3.5 ms @ 60 rpm (see output waveform)
supply voltage 5 V dc max.
output resolution 12, 24 ppr
insulation resistance 50 V dc, 100 MΩ
withstand voltage 50 V ac
MECHANICAL SPECIFICATIONS
parameter conditions/description min nom max units
shaft load axial 7 kgf
rotational torque with detent click
without detent click
50
90
130
210
gf•cm
gf•cm
rotational life 100,000 cycles
ENVIRONMENTAL SPECIFICATIONS
parameter conditions/description min nom max units
operating temperature -10 65 °C
storage temperature -40 75 °C
humidity 85 % RH
vibration 0.75 mm max. travel for 2 hours 10 55 Hz
Notes: 1. It is recommended to use products within 6 months.
2. For storage conditions, it is recommended to keep away from direct sunlight, corrosive gas, or high humidity conditions.
3. Use the product as soon as possible once the plastic bag has been unsealed, and reseal the bag if product is not immediately used.
4. The products are packaged in sealed bags with anti humidity tablets.
PART NUMBER KEY
ACZ16 X BR X E- XX XX X1- XXX
Version:
“blank” = switch
N = no switch
Resolution (ppr):
12 = 12 ppr, no detent
12C = 12 ppr, 12 detent
24 = 24 ppr, no detent
24C = 24 ppr, 24 detent
Bushing:
1 = M9 x 0.75 (H = 5)
2 = M9 x 0.75 (H = 7)
Shaft length:
15, 20, 25
Shaft type:
KQ, F
Mounting orientation:
A = Horizontal
D = Vertical
For more information, please visit the product page.
