UM10206 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
User manual Rev. 01 — 13 June 2006 10 of 12
Philips Semiconductors
UM10206
I2C Demonstration Board 2005-1 Quick Start Guide
10. Legal information
10.1 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
10.2 Disclaimers
GeneralInformation in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Philips Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Philips Semiconductors accepts no liability for inclusion and/or use
of Philips Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is for the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
10.3 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I
2
C-bus — logo is a trademark of Koninklijke Philips Electronics N.V.
UM10206 © Koninklijke Philips Electronics N.V. 2006. All rights reserved.
User manual Rev. 01 — 13 June 2006 11 of 12
Philips Semiconductors
UM10206
I2C Demonstration Board 2005-1 Quick Start Guide
Notes
Philips Semiconductors
UM10206
I2C Demonstration Board 2005-1 Quick Start Guide
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
For more information, please visit: http://www.semiconductors.philips.com.
For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com.
Date of release: 13 June 2006
Document identifier: UM10206
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
11. Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Assumptions. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Static Handling Requirements . . . . . . . . . . . . . 3
2.3 Minimum System Requirements. . . . . . . . . . . . 3
2.4 Adapter Power Requirements. . . . . . . . . . . . . . 3
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 Win-I2CUSB Lite Software . . . . . . . . . . . . . . . . 4
3.2 Demonstration Board hardware connection to
computer USB port. . . . . . . . . . . . . . . . . . . . . . 4
3.3 Connecting the remote sensor diode . . . . . . . . 4
4 Hardware description . . . . . . . . . . . . . . . . . . . . 5
5 I2C Demonstration Board 2005-1 block
diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 I2C Demonstration Board device description. 7
7 Starting Win-I2CUSB Lite . . . . . . . . . . . . . . . . . 8
8 Upgrades and experimentation . . . . . . . . . . . . 9
9 I2C Demonstration Board 2005-1 upgrades . . 9
10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
10.1 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10.2 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10.3 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

OM6275,598

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
DEMO BOARD I2C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet