WSXS-CANBUS TD Datasheet WSXS-CANBUS TD | P1-P3

Key Features

•

Comprehensive CAN and CAN FD

(non-ISO and ISO) trigger and

decode

•

Flexible triggering for data, error and

remote frames

•

Easily view decoded signals with

intuitive color-coded decode overlay

•

CAN and CAN FD specic

parameters to measure, plot and

analyze bus performance

•

Import a .dbc le to allow for

analysis to be performed on the

Symbolic (Application) layer

•

Supports CAN signals up to 1 Mb/s

and CAN FD signals up to 10 Mb/s

•

Powerful conditional ID and Data

triggering (in range, out of range,

less than, greater than)

•

Convenient table display with “zoom

to byte” capability

•

Quick search to identify specic

message packets

•

Simultaneously decode up to 4

busses including CAN, CAN FD or

other protocols

The Most Intuitive Decode

Decoded protocol information is

color-coded to specic portions of

the CAN, CAN FD, and ISO CAN FD

frame, and displayed directly on top

of physical layer signals creating

an intuitive and easy-to-understand

visual display. The decoded

information adjusts as the horizontal

scale is changed to always provide

the right amount of detail in both

short and long acquisitions.

Measure and Plot Bus

Performance

Powerful measurements and sophis-

ticated statistical, graphical, and

plotting tools simplify CAN system

debugging. Understanding CAN bus

problems and performance is

quick and easy.

Powerful CAN Triggering

The CAN and CAN FD trigger will

isolate Frame IDs, specic data

packets, remote frames or error

frames. For CAN FD signals, the

oscilloscope can trigger on both

ISO and non-ISO variants as well as

specic frames with the Bit Rate

Shift (BRS) bit. Powerful, conditional

triggering enables triggering on a

range of events such as a series of

Frame IDs or data messages.

Analyze the Symbolic Layer

Importing a .dbc le allows for

decoding, triggering, and measure-

ments to be performed directly on

the Symbolic (Application) layer,

enabling an easier to understand

CAN toolset.

CAN and CAN FD

Trigger, Decode

and Measure

With CAN and CAN FD trigger and decode the oscilloscope becomes

the ideal tool for debugging CAN controllers, busses and systems.

Identify and isolate specic frames with ID, Remote and Error frame

triggering. Decoding CAN signals provides tremendous insight into

activity on the bus, and measurement tools enable fast analysis of

bus performance.

TIME SAVING ANALYSIS AND DEBUG TOOLS

Timing and Bus

Measurements

CAN and CAN FD specic measurement

parameters allow you to quickly and

easily characterize a system and make

gateway measurements. Measure the

time between two messages on the

bus or from a CAN message to analog

signal. Measurement statistics and

histicons provide insight into the range

of measurements on the bus.

Data Extraction and Graphing

Extract data from the CAN and

CAN FD message streams and use

track functions to graphically plot

the data. Measured values are used

to convert digital information into an

analog waveform for easy comparison

to other electrical signals.

Interactive Table Display

Summarizes Results

Turn the oscilloscope into a proto-

col analyzer with the table display of

decoded information. Customize the

table to show only the data of interest

and touch a message in the table to

automatically display it on the screen.

Export the table for offline analysis.

Information on the steering

angle and steering

angle rate of change is

extracted from the CAN

message acquisition,

rescaled to decimal

values, and plotted as a

time-correlated “Track”

Quickly make CAN timing measurements and monitor sys-

tem performance with the CAN or CAN FD TDM parameters.

Teledyne LeCroy’s statistical measurements with histograms,

tracks and trends shows how the bus behaves over time.

Display decoded values in an easy-to-understand table. Values can be displayed in either hexadecimal or

symbolic formats. Filter decoded values to isolate information of interest.

Search through long records of decoded data by entering specic

message or frame details.

Time Saving Search

Search through long records of decoded

CAN data for specic Frame IDs, data

values, frame types or status bits.

CANbus TD

CANbus TDM /

CANbus TDM

SYMBOLIC

CAN FDbus TD

CAN FDbus TDM /

CAN FDbus TDM

SYMBOLIC

Denition

Protocol Setup

Select bit rate (10, 25, 33.333, 50, 83.333, 100, 125, 250, 500,

1000 kb/s or user-dened between 10-1000 kb/s)

Select Nominal bit rate (10, 25, 33.333, 50, 83.333, 100, 125, 250,

500 kb/s, 1 Mb/s or user-dened between 10 kb/s -1 Mb/s)

Select Data bit rate (0.5, 1.0, 1.5, 2.0, 5.0, 8.0, 10.0 Mb/s or

user-dened between 0.5 - 10 Mb/s)

Decode Capability

Format Hexadecimal Hexadecimal or Symbolic

Hexadecimal Hexadecimal or Symbolic

Decode Setup

Threshold denition required. Default is to Percent amplitude. Select

bit rate(s).

Threshold denition required. Default is to Percent amplitude. Select bit

rate(s) and data rate(s). Select ISO or non-ISO frames.

Decode Input Any analog Channel, Memory or Math trace.

# of Decode

Waveforms

Up to 4 buses may be decoded at one time. In addition, zooms can be displayed (with decoded information)

Location Overlayed over DATA waveform, on Grid.

Filtering Filter on IDs. Select In Range or Out of Range.

Visual Aid

Color Coding for Frame, ID, IDE, DLC, DATA, CRC, Ack, Stuff Bits, Bit

Index, and Errors

Decode information is intelligently annotated based on timebase

setting

Color Coding for Frame, ID, IDE, EDL, BRS, ESI, RTR, DLC, DATA, CRC,

Ack, Stuff Bits, Bit Index, and Errors

Decode information is intelligently annotated based on timebase

setting

Trigger Capability

Format Hexadecimal or Binary Hexadecimal, Binary or Symbolic* Hexadecimal or Binary Hexadecimal, Binary or Symbolic*

Trigger Setup

Trigger on All Frames, Frame ID, ID with Data, Remote Frames or Error

Frames

Trigger on All Frames, Frame ID, ID with Data, Remote Frames or Error

Frames. Support for ISO and non-ISO frames and BRS.

Address (ID)

Condition Setup

Specify one Frame ID or a range of Frame IDs. Frame ID trigger can be combined with Data

Conditional

Trigger Setup

Conditional Frame ID and Conditional Data triggering available. Choose from ≤, <, =, >, ≥, <>, in range, out of range or don’t care conditions

Data Setup

Hexadecimal: # Data Bytes = 0 to 12. Data can be dened by nibble. Triggers on that data pattern regardless of position

Binary: Any combination of 0, 1, or X for 1-96 bits. Triggers on that data pattern regardless of position.

Symbolic

: Select any message or signal from user dened .dbc le.

Nominal Bit Rates 10, 25, 33.333, 50, 83.333, 100, 125, 250, 500 kb/s, 1 Mb/s or user-dened between 10 kb/s -1 Mb/s

Data Bit Rates NA

0.5, 1.0, 1.5, 2.0, 5.0, 8.0, 10.0 Mb/s or user-dened between

0.5 - 10 Mb/s

Sampling Point Congure trigger sampling point for Nominal bit rate Congure trigger sampling point for Nominal and Data bitrate

Error Type Error Frames, Stuff Bit Errors, CRC Mismatch Errors

Error Frames, Stuff Bit Errors, CRC Mismatch Errors, Stuffbit Counter

Error, Stuffbit Counter Parity Error

Trigger Input Any analog Channel or the EXT input

Search Capability

Search Options Search for Index, ID, IDE, DLC, Data, and Status Search for Index, ID, IDE, EDL, BRS, ESI, DLC, Data, CL and Status

Measure/Graph Capability

CAN Timing

Measurements

CAN-CAN, CAN-Analog, Analog-CAN,

CANMsgNum, DeltaCan,

Time@CAN, CAN Message bit rate

CAN-CAN, CAN-Analog, Analog-CAN,

CANMsgNum, DeltaCan,

Time@CAN, CAN Message bit rate

CAN Data

Extraction

CAN-Value

CAN Bus Load

Measurements

NA CAN Bus Load % NA CAN Bus Load %

Graphing

Functions

Track, Trend and Histogram of

CAN measurements

Track, Trend and Histogram of

CAN measurements

Compatibility

Compatible

With:

For scope model compatibility refer to Compatibility section on the last page.

The minimum required software version for CANbus TDM and CANbus TD is 5.7.2.1 (specications and images shown here are from software

version 7.4.0.0 or later).

The minimum software version for CAN FDbus TD is 7.4.0.0.

The minimum software version for CAN FDbus TDM is 7.6.1.0.

The minimum software version for CANbus TDM SYMBOLIC and CAN FDbus TDM SYMBOLIC is 7.8.0.2.

* Only available with TDM SYMBOLIC option

SPECIFICATIONS

P1-P3 P4-P4

WSXS-CANBUS TD

Mfr. #:

Buy WSXS-CANBUS TD

Manufacturer:

Description:

CAN BUS TRIGGER&DECODE - WS-MXS

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

WSXS-CANBUS TD