DFR0271 Datasheet DFR0271 | P4-P5

Extra memory for the Mega

Wireless slots

Two wireless slots available which allow Xbee, blusteeth/Wifi to be used at the same time.

Adjustable output

An adjustable output

Power Supply

use 2 4 6 pins for Vin and 1 3 5 pins for GND Input Voltage (recommended) 7-20 V

DiagramN2

On board Nano2 is connected to the I2C stream, and (with jumpers plugged in) to the URM sensors

via 485 protocol. GMR board integrates a 485 protocol encoder/decoder, and our URM ultrasonic

sensors are also capable, thus allowing for an array of Ultrasound sensors to be connected. Nano

on socket 2 will then process this information accordingly. If you wish, you can unplug the jumpers

and directly connect 485 with jumper wires, to other pins, Allowing a different controller to drive the

Ultrasound sensors.

Mfr. #:

Manufacturer:

DFRobot

Description:

RF Development Tools GMR - General Mobile Robot

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union