Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
•
INFO@ARIESELEC.COM
WWW.ARIESELEC.COM
FEATURES
• Can be used with Intel 80/83C652 and 80C251 microprocessors and any IC that
follows standard DIP-to-PLCC pinout conventions.
• Allows user to switch package styles and avoid shortage problems.
• Designed to plug directly into your 44-pin PLCC socket.
• On-board bypass capacitors to reduce power/ground electrical noise.
• All DIP Pins brought out to the side of the adapter’s plated-through holes to facilitate
troubleshooting or debugging.
GENERAL SPECIFICATIONS
• PCB: natural UL 94V-0 FR-4, 0.062 [1.56] thick with 1-oz. Cu traces
• MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• MALE PIN PLATING: 200µ [5.08µ] Sn/Pb per ASTM B579-73 over 100µ [2.54µ]
Ni per SAE AMS-QQ-N-290
• SOCKET MATERIAL: UL 94V-0 glass-filled 4/6 Nylon
• FEMALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M
• FEMALE PIN PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 100µ [2.54µ] Ni
per SAE AMS-QQ-N-290
• 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08
• COLLET CONTACT PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 50µ
[127µ] Ni per SAE AMS-QQ-N-290
• OPERATING TEMPERATURE: 221°F [105°C]
• INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead
• WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead
• NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead
• SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.100-0.125 [2.54-3.18] long
18026
Rev. AA
P/N 1111163
40-Pin DIP-to-Socketable PLCC Adapter
Pin List
PLCC
Pin #
DIP
Pin #
PLCC
Pin #
DIP
Pin #
1 20 23 --
2 1 24 21
3 2 25 22
4 3 26 23
5 4 27 24
6 5 28 25
7 6 29 26
8 7 30 27
9 8 31 28
10 9 32 29
11 10 33 30
12 -- 34 --
13 11 35 31
14 12 36 32
15 13 37 33
16 14 38 34
17 15 39 35
18 16 40 36
19 17 41 37
20 18 42 38
21 19 43 39
22 20 44 40
ORDERING INFORMATION
Specify P/N 1111163
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT DATA SHEET 18027 FOR PLCC-TO-DIP ADAPTER WITH
INTEL PROCESSORS.
