X-NUCLEO-NFC01A1 Datasheet X-NUCLEO-NFC01A1 | P7-P9

DocID026566 Rev 2 7/9

UM1793 An overview of FCC regulations

5 An overview of FCC regulations

5.1 Part 15.105

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference's by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

5.2 Part 15.21

Any changes or modifications to this equipment not expressly approved by

STMicroelectronics may cause, harmful interference and void the FCC authorization to

operate this equipment.

Revision history UM1793

8/9 DocID026566 Rev 2

6 Revision history

Table 1. Document revision history

Date Revision Changes

19-Jun-2014 1 Initial release.

31-Oct-2014 2

Updated Figure 1: Dynamic NFC tag expansion board

based on M24SR for STM32 Nucleo.

Updated Figure 3: Top assembly view.

Updated Figure 4: Electrical schematics.

Added Section 5: An overview of FCC regulations.

DocID026566 Rev 2 9/9

UM1793

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and

improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on

ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order

acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or

the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

P1-P3 P4-P6 P7-P9

X-NUCLEO-NFC01A1

Mfr. #:

Buy X-NUCLEO-NFC01A1

Manufacturer:

STMicroelectronics

Description:

M24SR64-Y NFC/RFID Tag and Transponder Expansion Board

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

X-NUCLEO-NFC01A1