HMC519 Datasheet HMC519, HMC519-SX, HMC519LC4TR | P4-P6

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LOW NOISE AMPLIFIERS - SMT

HMC519LC4

v03.0514

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 18 - 31 GHz

Outline Drawing

Absolute Maximum Ratings

Drain Bias Voltage (Vdd1, Vdd2, Vdd3) +3.5 Vdc

RF Input Power (RFIN)(Vdd = +3.0 Vdc) +8 dBm

Channel Temperature 175 °C

Continuous Pdiss (T= 85 °C)

(derate 12 mW/°C above 85 °C)

1.08 W

Thermal Resistance

(channel to package bottom)

83 °C/W

Storage Temperature -65 to 150 °C

Operating Temperature -40 to 85 °C

ESD Sensitivity (HBM) Class 1B

Vdd (V) Idd (mA)

2.5 72

3.0 75

3.5 78

Typical Supply Current vs. Vdd

Note: Amplier will operate over full voltage ranges shown

above.

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

NOTES:

1. PACKAGE BODY MATERIAL: ALUMINA.

2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.

3. DIMENSIONS ARE IN INCHES (MILLIMETERS).

4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO

PCB RF GROUND.

Package Information

Part Number Package Body Material Lead Finish MSL Rating Package Marking

[2]

HMC519LC4 Alumina, White Gold over Nickel

MSL3

[1]

H519

XXXX

[1] Max peak reow temperature of 260 °C

[2] 4-Digit lot number XXXX

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LOW NOISE AMPLIFIERS - SMT

HMC519LC4

v03.0514

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 18 - 31 GHz

Pad Descriptions

Pad Number Function Description Interface Schematic

1, 5 - 14, 18,

20, 22, 24

N/C Not Connected

2, 4, 15, 17 GND

Package bottom has exposed metal paddle that

must be connected to RF/DC ground.

3 RFIN

This pad is AC coupled

and matched to 50 Ohms

16 RFOUT

This pad is AC coupled

and matched to 50 Ohms

19, 21, 23 Vdd3, Vdd2, Vdd1

Power Supply Voltage for the amplier. See application

circuit for required external components.

Application Circuit

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

LOW NOISE AMPLIFIERS - SMT

HMC519LC4

v03.0514

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 18 - 31 GHz

Item Description

J1, J2 2.92mm PCB mount K-Connector

J3 - J6 DC Pin

C1, C2, C3 100pF Capacitor, 0402 Pkg.

C4, C5, C6 1000pF Capacitor, 0603 Pkg.

C7, C8, C9 4.7 µF Capacitor, Tantalum

U1 HMC519LC4 Amplier

PCB

[2]

11995 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350.

List of Material for Evaluation PCB 119667

[1]

The circuit board used in this application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and exposed paddle should be connected

directly to the ground plane similar to that shown.

A sufficient number of via holes should be used to

connect the top and bottom ground planes. The

evaluation board should be mounted to an appro-

priate heat sink. The evaluation circuit board shown

is available from Hittite upon request.

Evaluation PCB

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6

HMC519

Mfr. #:

Buy HMC519

Manufacturer:

Analog Devices / Hittite

Description:

RF Amplifier lo Noise amp Chip, 18 - 32 GHz

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC519

HMC519

Products related to this Datasheet