SRBC-16A2ALG

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/16 A Output
Non-Isolated Under-voltage Lockout (UVLO)
High Efficiency Over Temperature Protection
High Power Density OCP/SCP
Excellent Thermal Performance Wide Input
Low Cost Wide Trim
Flexible Output Voltage
Sequencing
Remote On/Off
Active Low/High (Option)
Able to Sink & Source Current
Vout Prebias
Remote Sense
Industrial Temperature Range
Description
The Bel SRBC-16A2Ax modules are a series of non-isolated dc/dc converters that deliver up to 16 A of output
current with full load efficiency of 92% at 3.3 Vdc output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 Vdc to 5.0 Vdc over a wide range of input voltage (8.3 Vdc - 14 Vdc).
These modules have a sequencing feature that enables designers to implement various types of output voltage
sequencing when powering multiple voltages on a board. The open-frame construction and small footprint enable
designers to develop cost and space-efficient solutions. Standard features include remote On/Off, remote sense,
over current protection, short current protection, wide input, and programmable output voltage.
Part Selection
Output
Voltage
Input
Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active Low
Model Number
Active High
0.75 V - 5.0 V 8.3 V - 14 V 16 A 80 W 94% SRBC-16A2AL SRBC-16A2A0
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter Min Typ Max Notes
Input Voltage (continuous) -0.3 V - 15 V
Output Enable Terminal Voltage -0.3 V - 15 V
Sequencing Voltage
1
-0.3 V - Vin
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-55 °C
-
125 °C
Notes: All specifications are typical at 25 °C unless otherwise stated.
1. SRBC-16A2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin or leave it unconnected.
SRBC-16A2Ax RoHS Com
p
liant Rev.A
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/16 A Output
Input Specifications
Parameter Min Typ Max Notes
Input Voltage
Vo, set
3.63 V
Vo, set
> 3.63 V
8.3 V
8.3 V
12 V
12 V
14 V
13.2 V
Input Current (full load) - - 11 A
Input Current (no load) - 100 mA -
Remote Off Input Current - 2 mA -
Input Reflected Ripple Current (pk-pk) - 70 mA 200 mA
Input Reflected Ripple Current (rms) - - 150 mA
Tested with one 1000 uF/25 V AL input
capacitor with ESR=0.03 ohm max and 6
× 47 uF/16 V tantalum capacitors with
ESR=0.013 ohm max at 100 kHz, &
simulated source impedance of 1000 nH,
5 Hz to 20 MHz.
I
2
t Inrush Current Transient - 0.2 A
2
s0.4 A
2
s
Turn-on Voltage Threshold - 8.0 V -
Turn-off Voltage Threshold - 7.5 V -
Output Specifications
Parameter Min Typ Max Notes
Output Voltage Set Point -2% Vo,set - 2% Vo,set Vin=12 V, full load
Load Regulation - 0.1% Vo,set - Io=Io, min to Io, max
Line Regulation - 0.1% Vo,set - Vin=Vin, min to Vin, max
Regulation Over Temperature
(-40 °C to +85 °C)
- 0.3% Vo,set - Tref=Ta, min to Ta, max
Output Current 0 A - 16 A
Current Limit Threshold - 180% Io -
Short Circuit Surge Transient
- 1 A
2
s 3 A
2
s
Ripple and Noise (pk-pk) - 75 mV 100 mV
Ripple and Noise (rms) - 30 mV 45 mV
Tested with 0-20 MHz, 10 uF
tantalum capacitor & 1 uF TDK
ceramic capacitor at the output
Turn on Time - 6 mS 10 mS
Overshoot at Turn on - - 1% Vo,set
Output Capacitance - - 5000 uF
Transient Response
50% ~ 100% Max Load - 100 mV -
Settling Time - 50 uS -
100% ~ 50% Max Load - 100 mV -
Settling Time
V
O=0.75 V -
5.0 V
- 50 uS
-
di/dt=2.5 A/uS; Vin=12 V; and
with 2 × 150 uF polymer
capacitors at the output
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/16 A Output
General Specifications
Parameter Min Typ Max Notes
Efficiency
Vo=5.0 V
Vo=3.3 V
Vo=2.5 V
Vo=1.8 V
Vo=1.5 V
Vo=1.2 V
Vo=0.75 V
-
-
-
-
-
-
-
94%
92%
90%
88%
87%
85%
79%
-
-
-
-
-
-
-
Measured at Vin=12 V, full load
Switching Frequency 265 kHz 300 kHz 335 kHz
Over Temperature Shutdown
1
-
130 °C
-
Output Trim Range (Wide Trim) 0.7525 V - 5 V
Remote Sense Compensation - - 0.5 V
MTBF 2,666,488 hours
Calculated Per Bell Core SR-332 (I
O =80%
Io,max; Vo=5 V; Vin=12 V; T
a = 25°C)
Dimensions
Inches (L × W × H)
Millimeters
(
L × W × H
)
1.30 x 0.53 x 0.315
33.02 x 13.46 x 8.00
Weight - 8 g -
Notes: All specifications are typical at 25 °C unless otherwise stated.
1. The Tref temperature measurement location. For reliable operation the Tref 1 and Tref 2 must not
exceed 130
°C.
Control Specifications
Parameter Min Typ Max Notes
Remote On/Off
Signal Low (Unit Off) -0.2 V - 0.3 V
Signal High (Unit On) - - Vin, max
SRBC-16A2A0; Remote On/Off pin open, Unit
on.
Signal Low (Unit On) -0.2 V - 0.3 V
Signal High (Unit Off) 2.5 V - Vin, max
SRBC-16A2AL; Remote On/Off pin open, Unit
on.
Voltage Sequencing
Sequencing Delay Time 10 mS - -
Delay from Vin, min to application of voltage
on SEQ pin
Sequencing Slew Rate Capability - - 2 V/mS
Tracking Accuracy
Power-Up
Power-Down
-
-
100 mV
300 mV
200 mV
500 mV
Vin, min to Vin, max; Io, min to Io, max;
Vseq<Vo

SRBC-16A2ALG

Mfr. #:
Manufacturer:
Stewart Connector / Bel
Description:
Non-Isolated DC/DC Converters Non-Isolated DC-DC Converter 80W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet