19
LTC2845
sn2845 2845fs
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
5.00 ± 0.10
(2 SIDES)
NOTE:
1. DRAWING CONFORMS TO JEDEC PACKAGE
OUTLINE M0-220 VARIATION WHKD
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
PIN 1
TOP MARK
(SEE NOTE 6)
0.40 ± 0.10
37
1
2
38
BOTTOM VIEW—EXPOSED PAD
5.15 ± 0.10
(2 SIDES)
7.00 ± 0.10
(2 SIDES)
0.75 ± 0.05
R = 0.115
TYP
0.25 ± 0.05
(UH) QFN 0303
0.50 BSC
0.200 REF
0.200 REF
0.00 – 0.05
RECOMMENDED SOLDER PAD LAYOUT
3.15 ± 0.10
(2 SIDES)
0.18
0.18
0.23
0.435
0.00 – 0.05
0.75 ± 0.05
0.70 ± 0.05
0.50 BSC
5.20 ± 0.05 (2 SIDES)
3.20 ± 0.05
(2 SIDES)
4.10 ± 0.05
(2 SIDES)
5.50 ± 0.05
(2 SIDES)
6.10 ± 0.05 (2 SIDES)
7.50 ± 0.05 (2 SIDES)
0.25 ± 0.05
PACKAGE
OUTLINE
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.20mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
U
PACKAGE DESCRIPTIO
UHF Package
38-Lead Plastic QFN (5mm × 7mm)
(Reference LTC DWG # 05-08-1701)
20
LTC2845
sn2845 2845fs
LT/TP 0703 1K • PRINTED IN USA
LINEAR TECHNOLOGY CORPORATION 2002
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
FAX: (408) 434-0507
www.linear.com
RELATED PARTS
PART NUMBER DESCRIPTION COMMENTS
LTC1321 Dual RS232/RS485 Transceiver Two RS232 Driver/Receiver Pairs or Two RS485 Driver/Receiver Pairs
LTC1334 Single 5V RS232/RS485 Multiprotocol Transceiver Two RS232 Driver/Receiver or Four RS232 Driver/Receiver Pairs
LTC1343 Software-Selectable Multiprotocol Transceiver 4-Driver/4-Receiver for Data and Clock Signals
LTC1344A Software-Selectable Cable Terminator Perfect for Terminating the LTC1543 (Not Needed with LTC1546)
LTC1345 Single Supply V.35 Transceiver 3-Driver/3-Receiver for Data and Clock Signals
LTC1346A Dual Supply V.35 Transceiver 3-Driver/3-Receiver for Data and Clock Signals
LTC1543 Software-Selectable Multiprotocol Transceiver Terminated with LTC1344A for Data and Clock Signals, Companion to
LTC1544 or LTC1545 for Control Signals
LTC1544 Software-Selectable Multiprotocol Transceiver Companion to LTC1546 or LTC1543 for Control Signals Including LL
LTC1545 Software-Selectable Multiprotocol Transceiver 5-Driver/5-Receiver Companion to LTC1546 or LTC1543
for Control Signals Including LL, TM and RL
LTC1546 Software-Selectable Multiprotocol Transceiver 3-Driver/3-Receiver with Termination for Data and Clock Signals
LTC2844 3.3V Software-Selectable Multiprotocol Transceiver 3.3V Supply, 4-Driver/4-Receiver Companion to LTC2846 for Control
Signals Including LL
LTC2846 3.3V Software-Selectable Multiprotocol Transceiver 3.3V Supply, 3-Driver/3-Receiver with Termination for Data and Clock
Signals, Generates the Required 5V and ±8V Supplies for LTC2846 and
Companion Parts
LTC2847 Software-Selectable Multiprotocol Transceiver 3-Driver/3-Receiver with Termination for Data and Clock Signals.
with 3.3V Digital Interface Seperate Supply for Digital Interface Works Down to 3.3V
U
TYPICAL APPLICATIO
D2 D1
LTC2845
RTS
DTRDSR DCDCTS
D3
R2 R1
R3
LLRITMRL
TXDSCTETXC
RXCRXD
21424111512179314192062322513 81018*21 25 7 16
D4D5
R4R5
LTC2846
D1D2D3
R1R2R3
TTTTT
*OPTIONAL
2845 TA01
RTS A (105)
RTS B
DTR A (108)
DTR B
CTS A (106)
SG (102)
SHIELD (101)
DB-25 CONNECTOR
DCD A (107)
DCD B
DSR A (109)
DSR B
LL A (141)
RI A (125)
TM A (142)
RL A (140)
CTS B
SCTE B
SCTE A (113)
TXD B
TXD A (103)
TXC A (114)
TXC B
RXC A (115)
RXC B
RXD A (104)
RXD B
DTE or DCE Multiprotocol Serial Interface with DB-25 Connector

LTC2845IUHF#PBF

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
RS-232 Interface IC 3.3V Multiprotocol Control Xcvr
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union