MIC38C42/3/4/5 Micrel, Inc.
September 2007 1 M9999-091107
MIC38C42/3/4/5
BiCMOS Current-Mode PWM Controllers
General Description
The MIC38C4x are fixed frequency, high performance, cur-
rent-mode PWM controllers. Micrel’s BiCMOS devices are
pin compatible with 384x bipolar devices but feature several
improvements.
Undervoltage lockout circuitry allows the ’42 and ’44 versions
to start up at 14.5V and operate down to 9V, and the ’43 and
’45 versions start at 8.4V with operation down to 7.6V. All
versions operate up to 20V.
When compared to bipolar 384x devices operating from a
15V supply, start-up current has been reduced to 50µA typical
and operating current has been reduced to 4.0 mA typical.
Decreased output rise and fall times drive larger MOSFETs,
and rail-to-rail output capability increases efficiency, espe-
cially at lower supply voltages. The MIC38C4x also features
a trimmed oscillator discharge current and bandgap refer-
ence.
The MIC38C4x denotes 8-pin plastic DIP, SOIC, and MSOP
packages. MIC384Cx-1 denotes 14-pin plastic DIP and
SOIC packages. 8-pin devices feature small size, while 14-
pin devices separate the analog and power connections for
improved perfomance and power dissipation.
For fast rise and fall times and higher output drive, refer to
the MIC38HC4x.
Functional Diagram
Features
Fast 40ns output rise and 30ns output fall times
–40°C to +85°C temperature range
meets UC284x specifications
High-performance, low-power BiCMOS Process
Ultralow start-up current (50µA typical)
Low operating current (4mA typical)
CMOS outputs with rail-to-rail swing
≥ 500kHz current-mode operation
Trimmed 5V bandgap reference
Pin-for-pin compatible with UC3842/3843/3844/3845(A)
Trimmed oscillator discharge current
UVLO with hysteresis
Low cross-conduction currents
Applications
Current-mode, off-line, switched-mode power supplies
Current-mode, dc-to-dc converters.
Step-down “buck” regulators
Step-up “boost” regulators
Flyback, isolated regulators
Forward converters
Synchronous FET converters
T Q
S
R
Q
R
2R
Oscillator
UVLO
5V
Reference
VDD
7 (12)
VREF
8 (14)
RT/CT
4 (7)
FB
2 (3)
2.5V
COMP
1 (1)
GND* (AGND)
5 (9)
ISNS
3 (5)
OUT
6 (10)
( )
pins are on MIC38C4x-1 (14-lead) versions only
*
MIC38C4x, (8-lead) versions only
(VD)
(11)
(PGND)
(8)
35V
*
*
MIC38C42, MIC38C43 (96% max. duty cycle) versions only
MIC38C44, MIC38C45 (50% max. duty cycle) versions only
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
MIC38C42/3/4/5 Micrel, Inc.
M9999-091107 2 September 2007
UVLO Thresholds
Startup 8.4V Startup 14.5V
Duty Cycle Minimum Operating 7.6V Minimum Operating 9V
0% to 96% MIC38C43 MIC38C42
0% to 50% MIC38C45 MIC38C44
Selection Guide
Ordering Information
Part Number* Temperature Range Package
Standard Pb-Free
MIC38C42BN MIC38C42YN -40°C to +85°C 8-pin Plastic DIP
MIC38C43BN MIC38C43YN -40°C to +85°C 8-pin Plastic DIP
MIC38C44BN MIC38C44YN -40°C to +85°C 8-pin Plastic DIP
MIC38C45BN MIC38C45YN -40°C to +85°C 8-pin Plastic DIP
MIC38C42-1BN Contact Factory -40°C to +85°C 14-pin Plastic DIP
MIC38C43-1BN Contact Factory -40°C to +85°C 14-pin Plastic DIP
MIC38C44-1BN MIC38C44-1YN -40°C to +85°C 14-pin Plastic DIP
MIC38C45-1BN Contact Factory -40°C to +85°C 14-pin Plastic DIP
MIC38C42BM MIC38C42YM -40°C to +85°C 8-pin SOIC
MIC38C43BM MIC38C43YM -40°C to +85°C 8-pin SOIC
MIC38C44BM MIC38C44YM -40°C to +85°C 8-pin SOIC
MIC38C45BM MIC38C45YM -40°C to +85°C 8-pin SOIC
MIC38C42BMM MIC38C42YMM -40°C to +85°C 8-pin MSOP
MIC38C43BMM MIC38C43YMM -40°C to +85°C 8-pin MSOP
MIC38C44BMM MIC38C44YMM -40°C to +85°C 8-pin MSOP
MIC38C45BMM MIC38C45YMM -40°C to +85°C 8-pin MSOP
MIC38C42-1BM MIC38C42-1YM -40°C to +85°C 14-pin SOIC
MIC38C43-1BM MIC38C43-1YM -40°C to +85°C 14-pin SOIC
MIC38C44-1BM MIC38C44-1YM -40°C to +85°C 14-pin SOIC
MIC38C45-1BM MIC38C45-1YM -40°C to +85°C 14-pin SOIC
* Refer to the Part Number Cross Reference for a listing of Micrel devices equivalent to UC284x and UC384x devices.
MIC38C42/3/4/5 Micrel, Inc.
September 2007 3 M9999-091107
Pin Description
Pin Number Pin Number Pin Name Pin Function
N, M, MM -1
BN, -1BM
1 1 COMP Compensation: Connect external compensation network to modify the error
amplifier output.
2 NC Not internally connected.
2 3 FB Feedback (Input): Error amplifier input. Feedback is 2.5V at desired output
voltage.
4 NC Not internally connected.
3 5 ISNS Current Sense (Input): Current sense comparator input. Connect to current
sensing resistor or current transformer.
6 NC Not internally connected.
4 7 RT/CT Timing Resistor/Timing Capacitor: Connect external RC network to select
switching frequency.
5 GND Ground: Combined analog and power ground.
8 PGND Power Ground: N-channel driver transistor ground.
9 AGND Analog Ground: Controller circuitry ground.
6 10 OUT Power Output: Totem-pole output.
11 VD Power Supply (Input): P-channel driver transistor supply input. Return to
power ground (PGND).
7 12 VDD Analog Supply (Input): Controller circuitry supply input. Return to analog
ground (AGND).
13 NC Not internally connected.
8 14 VREF 5V Reference (Output): Connect external RC network.
1
2
3
4
8
7
6
5
COM P
FB
ISN S
RT/ CT
V R E F
VDD
OUT
GND
MIC38C4x
2NC
NC13
3FB
VDD12
4NC
VD
11
5ISN S
OUT
10
6NC
AGND
9
7RT/ CT
PGND
8
1C O MP
V R E F14
MIC38C4x-1
8-Pin DIP (N)
8-Pin SOIC (M)
8-Pin MSOP (MM)
14-Pin DIP (-1
BN)
14-Pin SOIC (-1BM)
Pin Configuration

MIC38C45BMM

Mfr. #:
Manufacturer:
Description:
IC REG CTRLR MULT TOPOLOGY 8MSOP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union