LXMSJZNCMF-198

UHF MAGICSTRAP
®
Data Sheet
LXMSJZNCMF-198
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
7
Rev1.1 Oct, 2017
NOTICE
1. Storage Conditions:
To avoid damaging, be sure to observe the following points.
- Store products where the ambient temperature is 15 to 35 °C and humidity 45 to 75% RH.
(Packing materials, In particular, may be deformed at the temperature over 40 °C.).
- Store products in non corrosive gas (Cl
2
, NH
3
,SO
2
, No
x
, etc.).
- Stored products should be used within 6 months of receipt.
This product is applicable to MSL1 (Based on IPC/JEDEC J-STD-020)
2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock
may break products due to the nature of ceramics structure.
3. Cleaning Conditions:
Any cleaning is not permitted..
4. Operational Environment Conditions:
Products are designed to work for electronic products under normal environmental conditions
(ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the
similar conditions to the above-mentioned. However, if products are used under the following circumstances, it
may damage products and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl
2,
NH
3,
SO
x,
NO
x
etc.).
- In an atmosphere containing combustible and volatile gases.
- In a dusty environment.
- Direct sunlight
- Water splashing place.
- Humid place where water condenses.
- In a freezing environment.
If there are possibilities for products to be used under the preceding clause, consult with Murata
before actual use.
If product malfunctions may result in serious damage, including that to human life,
sufficient fail-safe measures must be taken, including the following:
(1) Installation of protection circuits or other protective device to improve system safety
(2) Installation of redundant circuits in the case of single-circuit failure
UHF MAGICSTRAP
®
Data Sheet
LXMSJZNCMF-198
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
8
Rev1.1 Oct, 2017
5. Input Power Capacity:
Products shall be used in the input power capacity as specified in this specification.
Inform Murata beforehand, in case that the components are used beyond such input power
capacity range.
6. Limitation of Applications:
The products are designed and produced for application in ordinary electronic equipment
(AV equipment, OA equipment, telecommunication, etc). If the products are to be used in
devices requiring extremely high reliability following the application listed below, you should
consult with the Murata staff in advance.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment.
- Medical equipment.
- Transportation equipment (vehicles, trains, ships, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Data-procession equipment.
- Application which malfunction or operational error may endanger human life and property of assets.
- Application which related to occurrence the serious damage
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
!
Note:
Please make sure that your product has been evaluated and confirmed against your specifications when
our product is mounted to your product.
All the items and parameters in this product specification have been prescribed on the premise
that our product is used for the purpose, under the condition and in the environment agreed
upon between you and us. You are requested not to use our product deviating from such
agreement.
We consider it not appropriate to include other terms and conditions for transaction warranty in
product specifications, drawings or other technical documents. Therefore, even if your original
part of this product specification includes such terms and conditions as warranty clause, product liability
clause, or intellectual property infringement liability clause, we are not able to accept such terms and
conditions in this product specification unless they are based on the governmental
regulation or what we have agreed otherwise in a separate contact. We would like to suggest
that you propose to discuss them under negotiation of contract.

LXMSJZNCMF-198

Mfr. #:
Manufacturer:
Murata Electronics
Description:
RFID Transponders Ultra small UHF RFID Integrated antenna
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet