Philips Semiconductors Product specification
74ALVCH16540
16-bit buffer/line driver, inverting,
5V input tolerant (3-State)
1997 Aug 11
4
RECOMMENDED OPERATING CONDITIONS
LIMITS
MIN MAX
DC supply voltage 2.5V range (for max. speed
performance)
2.3 2.7
V
CC
DC supply voltage 3.3V range (for max. speed
performance)
3.0 3.6
V
DC supply voltage (for low-voltage applications) 1.2 3.6
DC Input voltage range For data input pins 0 V
CC
I
DC Input voltage range For control pins 0 5.5
V
O
DC output voltage range 0 V
CC
V
T
amb
Operating free-air temperature range –40 +85 °C
t
r
, t
f
Input rise and fall times
V
CC
= 2.3 to 3.0V
V
CC
= 3.0 to 3.6V
0
0
20
10
ns/V
ABSOLUTE MAXIMUM RATINGS
1,
2
In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER CONDITIONS RATING UNIT
V
CC
DC supply voltage –0.5 to +4.6 V
I
IK
DC input diode current V
I
0 –50 mA
V
I
DC input voltage
For control pins and data inputs of ALVC
parts
2
–0.5 to +5.5
V
For data inputs of ALVCH parts
2
–0.5 to V
CC
+0.5
I
OK
DC output diode current V
O
V
CC
or V
O
0 50 mA
V
O
DC output voltage Note 2 –0.5 to V
CC
+0.5 V
I
O
DC output source or sink current V
O
= 0 to V
CC
50 mA
I
GND
, I
CC
DC V
CC
or GND current 100 mA
T
stg
Storage temperature range –65 to +150 °C
P
TOT
Power dissipation per package
–plastic medium-shrink SO (SSOP)
–plastic mini-pack (TSSOP)
For temperature range: –40 to +125 °C
above +55°C derate linearly with 11.3 mW/K
above +55°C derate linearly with 8 mW/K
850
600
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
