DPP25-5

1131-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
DPP Series
Features
Low Cost
Universal Input
NEC NFPA70 Class 2
(2)
UL508 Listed
Class 1, Division 2 (ISA 12.12)
(3)
-10 to +71°C Operation
15-100W, 5-48V Output DIN Rail Mount Power Supplies
(1) Recommend 1” clearance on all sides.
(2) See model selector. Evaluated to NEC NFPA70 Class 2 output per UL1310.
(3) See model selector.
*Safety certi ed for AC input only
Model DPP15 DPP25/30 DPP50 DPP100
AC Input Voltage range VAC 85 - 264VAC 85 - 132VAC
176 - 264VAC
Input Frequency Hz 47 - 63Hz
DC Input Voltage range - 90 - 375VDC* 210 - 375VDC*
Inrush Current (115 / 230VAC) A <35A 35 / 45A 35 / 50A 35 / 55A
Power Factor - Meets EN61000-3-2 Class A
Input Current (230VAC) A 0.25 0.4 0.7 1.2
Leakage Current mA <0.75mA, 265VAC, 63Hz
Output Voltage Accuracy % ±1% (24V outputs preset at 24.5V)
Line Regulation % < 0.5%
Load Regulation % < 0.5%
Ripple and Noise mV 50mV
Overcurrent Protection (Typ) - >110% (fold forward type)
Overvoltage Protection V 120 - 137.5%
Hold Up Time (115VAC input) ms > 20ms
Parallel switch - No Yes
LED Indicator - Green LED = On
Operating Temperature °C -10* to +71°C (Derate linearly 5%/°C from 61 to 71°C) * -25°C start up, DPP25-50 only
Storage Temperature °C -25 to +85°C
Operating Humidity - 20 - 90% RH (non condensing)
Cooling (1) - Convection
Withstand Voltage - Input to Output 3kVAC for 1 min.
Shock - Half sine wave, 4G, 22ms, 3 times per face, X, Y, Z
Vibration - 10-500Hz (20 min sweep) 0.002G
2
/Hz, 1 Grms acceleration X, Y, Z, 1 hour
Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC
Safety Agency Approvals - UL60950-1, UL508, NEC Class 2
(2)
, EN60950-1, CE Mark, ISA 12.12
(3)
Emissions - EN55011, EN55022 class B Radiated & Conducted, EN61000-6-3
Immunity - EN61000-6-2, EN61000-4-2 Level 4, EN61000-4-3, EN61000-4-6 Level 3,
EN61000-4-4 Level 4 (I/P) Level 3 (O/P), EN61000-4-5 Level 3,
EN61000-4-8, EN61000-4-11
Weight (Typ) g 130 260 390
Size (WxHxD) in 0.9x2.95x3.81” 1.77x2.95x3.58” 2.86x2.95x3.81”
Case material - Flame Retardant Polycarbonate (UL94 V-0)
MTBF (MIL-HDBK-217F, GF25) Hours 287,000 >288,000 269,000 239,000
Warranty yrs Three years
Speci cations
Key Market Segments & Applications
1141-800-526-2324 • www.us.tdk-lambda.com/lp/
Revision C3: May 2015
DPP Series
For Additional Information, please visit
us.tdk-lambda.com/lp/products/dpp-series.htm
Installation:
Snap-on Mounting - snap onto DIN Rail TS35/7.5 or
TS35/15. (No tools required)
Cooling - Normal Convection
Clearance - 25mm all sides
Connection - Use copper wire 0.5-2.5mm2 (AWG24-12)
DPP15 Outline
DPP25-DPP50 Outline
DPP100 Outline
DSP/DPP 10W to 480W power supplies
DLP 75W to 240W power supplies
DLP-PU Redundancy Module (20A)
R Series 3A to 30A single & three phase EMI Filters
Other DIN Rail Products
Voltage Voltage Current Power Ef c. UL1310 ISA12.12
Model (V) Adjust (V) (A) (W) (typ) % Class 2 Class 1 Div 2
DPP25-5 5 5-6 5.0 25 78 - Yes
DPP30-12 12 9.9-12.1 2.5 30 83 Yes Yes
DPP50-15 15 11.9-15.1 3.4 50 85 Yes Yes
DPP15-24 24 22.5-28.5 0.63 15 81 Yes -
DPP30-24 24 22.5-28.5 1.3 30 84 Yes Yes
DPP50-24 24 22.5-28.5 2.1 50 86 Yes Yes
DPP100-24 24 22.5-28.5 4.2 100 87 - -
DPP50-48 48 48-56 1.05 50 87 Yes Yes
Model Selector

DPP25-5

Mfr. #:
Manufacturer:
TDK-Lambda
Description:
DIN Rail Power Supplies 25W 5V 5A DIN Rail 115/230VAC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union