Driver Specification Sheet
Model No:
TA6FD00-04
Product Line:
Tymphany
Rev:
1
Last Update:
2017-04-21 12:39:42
Product Description
This 2 inch 4 ohm member of the new TA family sets a high standard for compact full range drivers.
Intended for applications such as television soundbars and other compact applications in mind. Design
features in this family include a stiff steel basket with venting under the spider to aid cooling of the
motor, a ferrite magnet motor with copper cap to lower coil inductance, providing low distortion at low
frequencies and extended high frequency response. A black anodized aluminium cone and a black
anodized aluminium dust cap are employed on the driver, coupled directly to the voice coil.
Mechanical Drawing
Specifications
DC Resistance
Revc Ohms 3.47 5.0%
Energy Bandwidth Product
EBP (1/Qes)*fs
Minimum Impedance
Zmin Ohms 3.99 7.5%
Moving Mass
Mms g 1.4
Voice Coil Inductance
Le mH 0.02
Suspension Compliance
Cms um/N 822.1
Resonant Frequency
Fs Hz 146.6 15%
Effective Cone diameter
D cm 4.4
Mechanical Q Factor
Qms 3.78
Effective Piston Area
Sd cm^2 15.2
Electrical Q Factor
Qes 1.24
Effective Volume
Vas L 0.27
Total Q Factor
Qts 0.93
Motor Force Factor
BL Tm 1.93
Ratio Fs/Qts
F Fs/Qts 157.3
Motor Efficiency Factor
ß (T*M^2)/Ohms 1.1
Half Space Sensitivity @2.83V
db@2.83V/1M dB 84.08 +/- 1.0db
Voice coil former Material
VCfm ASV
Half Space Sensitivity @1W/1M
db@1W/1M dB 81.1 +/- 1.0db
Voice coil inner diameter
VCd mm 19.32
Gap Height
Gh mm 3
Rated Noise Power
P W 10
Maximum Linear Excursion
Xmax mm 1
Test Spectrum Bandwidth
100Hz-20KHz
Ferrofluid Type
FF
Driver Size
Inch 2 in
Driver Mass
Kg 0.17
Frequency and Impedance Response
Tymphany HK LTD
Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong
E-mail: sales@tymphany.com
