© 2017 DESCO INDUSTRIES INC.
Employee Owned
3651 WALNUT AVE., CHINO, CA 91710
PHONE: (909) 627-2453
WEBSITE: MendaPump.com
DRAWING
NUMBER
36091
DATE:
December
2017
ESD BRUSH, CONDUCTIVE, ROUND HANDLE, BEIGE SOFT
BRISTLES, 1/4 IN
Features:
• ESD Brushes are ideal for removing dust, dirt and left over
materials from printed circuit boards (PCB) and other static
sensitive components
• Brushes minimize static charge generation and remove
electrostatic charges to ground when held by grounded personnel
• Volume Resistance of Conductive Fibers:
1 x 10
3
to < 1 x 10
4
ohms tested per ANSI/ESD STM 11.12
• Bristle Material: Natural hair bristles with conductive black fibers
• Bristle Firmness: Soft
• Length 6" (152mm)
• Brush Width: 1/4" (6mm)
• Handle Material: Conductive black polypropylene
Specications and procedures subject to change without notice.
Unless otherwise noted, tolerance is ±10%.
1/4’’
ESD Handbook TR20.20 Table 1 lists under Typical Static Electricity
Sources “Brushes (camel/pig hair and synthetic bristles).” “It should be
understood that any object, item, material or person could be a source
of static electricity in the work environment. Removal of unnecessary
nonconductors, replacing nonconductive materials with dissipative or
conductive materials and grounding all conductors are the principle
methods of controlling static electricity in the workplace, regardless of
the activity.” (TR 20.20 section 2.4)
Made in Israel
6”
