TB6568KQ
2017-04-14
5. Overcurrent Shutdown Circuits (ISD)
The TB6568KQ incorporates overcurrent shutdown (ISD) circuits monitoring the current that flows through
each of all the four output power transistors.
The threshold current ranges from 3 A to 6 A. If any of the ISDs detects an overcurrent for more than 5.1 µs
(typ.), which is the predefined detection time, all the output transistors are turned off and enter High
impedance state.
The shutdown is released and the TB6568KQ resumes the normal operation when both the IN1 pin and IN2
pin are driven Low.
Note: The ISD is activated if the absolute maximum current rating is violated. Note that the circuit is provided as
an auxiliary only and does not necessarily provide the IC with a perfect protection from damages due to
overcurrent caused by power fault, ground fault, load-short and the like.
ISD internal signal
H
L
IN1, IN2
H
L
OUT1, OUT2
Threshold
(typ.)
Output current
More than 1 µs (typ.)