DIMENSIONS:
MM
(INCHES)
IEC EIA Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Carrier tape width W W
18 -0.5/+1.0
(.709) (-0.02/+.039)
Hold down tape width W
4
11
min.
W
0
(.433)
Hold down tape No protrusion
Top distance between tape edges W
2
W
6
3
max.
(.118)
Sprocket hole position W
1
W
5
9 -0.5/+0.75
(.354) (-0.02/+0.03)
Sprocket hole diameter D
0
D
0
4 ±0.2
(.157) (±.0078)
Abscissa to plane (straight lead) H H
18.5 ±3.0
(.728) (±.118)
Abscissa to plane (kinked lead) H
0
H
0
16 ±0.5
(.63) (±.02)
Abscissa to top (straight lead) H
1
H
1
38.0
max.
(1.496)
Abscissa to top (kinked lead) H
1
H
1
32.2
max.
(1.268)
Overall width w/lead protrusion (straight lead) C
1
55.0
max.
(2.165)
Overall width w/lead protrusion (kinked lead) C
1
43.2
max.
(1.7)
Overall width w/o lead protrusion (straight lead) C
2
54.0
max.
(2.126)
Overall width w/o lead protrusion (kinked lead) C
2
42.5
max.
(1.673)
Lead protrusion I
1
L
1
1.0
max.
(.039)
Protrusion of cutout L L
11
max.
(.433)
Protrusion beyond hold-down tape I
2
I
2
Notspecied
Sprocket hole pitch P
0
P
0
12.7 ±0.3
(0.5) (±.012)
Pitch tolerance 20 consecutive
±1
(±.039)
Device pitch: MF-R005–MF-R160, MF-R/90,
MF-RX020/72–MF-RX030/72
12.7 ±0.3
(0.5) (±.012)
Device pitch: MF-R185–MF-R400, MF-R/600, MF-RX110–MF-RX375
MF-RX040/72–MF-RX375/72
25.4 ±0.6
(1.0) (±.024)
Tape thickness t t
0.9
max.
(.035)
Tape thickness with splice: MF-R010–MF-R160, t
1
max.
MF-RX110/72–MF-RX185/72
1.5
(.059)
Tape thickness with splice: MF-R250–MF-R1100, t
1
max.
MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72
2.3
(.091)
Splice sprocket hole alignment
0
±0.3
(±.012)
Body lateral deviation Δ
h
Δ
h
0
±1.0
(±.039)
Body tape plane deviation Δ
p
Δ
p
0
±1.3
(±.051)
MF-R, MF-R/90, MF-R/600, & MF-RX, & MF-RX/72 Series
Tape and Reel Specifications
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
DIMENSIONS:
MM
(INCHES)